Trang chủ / Sản phẩm /

NTP100-TC

NTP server synchronized to time code input with automatic time code source detection. Supports SMPTE (30/25/25 fps), Leitch Date Encoding Standard, IRIG-B pulse width coded (unmodulated) DC, IEEE 1344 standard, IRIG-B(1) 1 kHz Amplitude Modulated, IEEE 1344 standard


The NTP100-TC is an NTP time server that synchronizes to a time code source and converts the signal to Network Time Protocol. It automatically detects the  incoming time code source; long-term accuracy is the same as the  external source.  With loss of time code, the device will revert to an internal oscillator with accuracy of better than 165 msec/day.


  • Converts time code to NTP
  • NTP output accuracy of ± 2 ms
  • Time stamp precision of  5-10  ms
  • Time server synchronized to your existing IRIG or SMPTE time code source
  • Automatically detects time code source
    • SMPTE (30/25/25 fps), Leitch Date Encoding Standard
    • IRIG-B pulse width coded (unmodulated) DC, IEEE 1344 standard
    • IRIG-B(1) 1 kHz Amplitude Modulated, IEEE 1344 standard
  • NTP query (Unicast), Multicast or Broadcast modes
  • Assignable network configuration
  • Configuration via Telnet/SSH or included WinDiscovery 
  • IPv4/IPv6 compatible

Holdover Accuracy  

  • With loss of power or reference, device reverts to an internal precision TCXO temperature-compensated crystal oscillator with accuracy of ± 1min/year or < 165ms per day
  • High-stability option with OCXO provides typical stability of 1 ppb/day or ± 250ms/year

Rack Mount  

  • Optional RM4 rack mount kit available

Connectors  

  •  RJ45 - 10/100MB Ethernet
  • DC input - 2.1 mm male jack
  • 3-pin terminal block (differential time code input)
  • BNC (single-ended time code input)
  • USB for configuration

Power Supply  

  • DC input (9-28 VDC)  
  • Power consumption:
  • Includes an external 24 VDC wall mount power supply with locking DC plug, UL & CE listed.  Supplied with your choice of US, Euro, British or AUS/NZ plug - others optionally available. 

 

Network Compatibility  

  • NTP unicast, multicast, or broadcast mode
  • Supports:
    • NTP v2 (RFC 1119)
    • NTP v3 (RFC 1306) 
    • NTP v4 (RFC 5905)
  • DHCPv4, DHCPv6 for automatic acquisition of network address, name servers, and timeserver configuration
  • Telnet/SSH communication 
  • IPv4/IPv6 compatible
  • SNMP with custom MIB

Configuration  

  • Provides dynamic configuration for networking parameters
  • Network discovery tool provides automatic discovery of NTP devices attached to network without changing PC’s networking configuration
  • Configuration is saved to non-volatile memory and survives power losses
  • Authenticated network messages prevent unauthorized tampering of clock configuration

Physical Size: 

  • 6.44 x 4.06 x 1.44 in (16.35 x 10.32 x 3.65 cm) 
  • 16 oz (453.6 g)

Case

  • Cover: black aluminum  
  • Front/rear panel: clear anodized aluminum 

Compliance  

  • CE Marked – Available for sale in EU  
  • FCC, Part 15, Class B, emissions 

 

 

Sản phẩm khác

  • VCL-2145-LC, GPS Primary Reference Clock (PRC)

    VCL-2145-LC, GPS Primary Reference Clock (PRC)

    GPS Primary Reference Clock (PRC) provides 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits clock outputs with high stability OCXO Holdover Clock. Rubidium Clock option available.

  • VCL-2145-SLV, PTP IEEE-1588v2 Slave Clock

    VCL-2145-SLV, PTP IEEE-1588v2 Slave Clock

    PTP Slave Clock for ToD and Frequency Synchronization - synchronizes to PTP Grandmaster to provide IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits clock outputs. OCXO and Rubidium Holdover Clock options available

  • NTP100-GPS

    NTP100-GPS

    Stratum 1 NTP server locked to GPS satellites for legally traceable time-stamping.

  • NTP100-OSC

    NTP100-OSC

    Stand-alone NTP server with internal precision temperature controlled crystal oscillator.

  • GMR1000

    GMR1000

    The GMR1000 is high-precision, multi-function master clocks that can act as an NTP server, PTP grandmaster, time code generator or frequency reference.

  • GMR5000

    GMR5000

    The GMR5000 is high-precision, multi-function master clocks that can act as an NTP server, PTP grandmaster, time code generator or frequency reference.

  • GPS Module 6875 LAN

    GPS Module 6875 LAN

    Module 6875 is a GPS Time Server in a compact aluminium housing for 35mm DIN rail mounting (DIN EN 60715 TH35).

  • GPS Module 8029NTS

    GPS Module 8029NTS

    Time Server 8029NTS for DIN Rail mounting – compact and highly flexible at the same time

  • GPS Module 6870

    GPS Module 6870

    Module 6870 is a GPS clock in a compact aluminium housing for 35mm DIN rail mounting (DIN EN 60715 TH35). The module is easily clipped onto the rail via a clip based on "snap-in" mechanism.

Hotline: 0919.900.247