Trang chủ / Sản phẩm /

GPS Module 8029NTS

Time Server 8029NTS for DIN Rail mounting – compact and highly flexible at the same time


On purchase you decide on

  • which additional signal output modules (incl. physical signal output and plug-in connection) you optionally want to have integrated in your system:
    • 1 independent NTP time server is integrated in your system by default
    • you can specify on purchase if you need an extension slot to be equipped with an additional independent NTP time server or with the following optional signal output modules:
      • IRIG-B (analogue / digital)
      • DCF77 pulse
      • cyclic pulses
    • the external time synchronization source:
      • GPS (immediately available)
      • IRIG-B (on demand)
    • which kind of power supply you require:
      • 100-240V AC
      • 110-250V DC
      • 24V DC
      • 48V DC
    • which type of crystal to be integrated in the application:
      • standard crystal
      • VCTCXO crystal

The completely maintenance-free and highly-precise network time server for DIN Rail mounting is the ideal synchronization solution of networks and industrial applications.

  • 1 independent NTP time server is integrated by default; on request your system can be equipped with 1 additional independent NTP time server or with the following signal output modules
    • IRIG-B (analogue / digital)
    • DCF77 pulse
    • cyclic pulses
  • simple, complete and safe operation and parameterisation (password protection and activatable https protocol) via a password-protected WebGUI (optional SSH/Telnet)
  • current status bar easily available via WebGUI
  • important information for implementing and about operating status available via status-LEDs at the front panel (if WebGUI-access is not available)
  • improved security ensured by
    • symmetric keys
    • access restriction
    • autokey
    • deactivation of non-used network protocols
  • SyncOFF Timer (reception failure bypassing) for accurate operation even based on difficult reception conditions
  • synchronization status output via optical coupler
  • GPS antenna circuit with potential isolation and antenna circuit control (supervision if antenna input is open or short-circuited)
  • By GPS time synchronization and the worldwide used time protocol NTP the time server 8029NTS turns into a highly accurate NTP Stratum 1 time server
  • synchronization of IEC 61850 compatible devices via NTP/SNTP
  • closed aluminium profile housing for easy and horizontal DIN Rail mounting according to DIN EN 60715 TH35
  • automatic switch-over of summer/winter time
  • high freewheel accuracy provided by GPS supported regulation of the internal quartz basis
  • redundant multiple validation of the synchronization signal for an error-free and leap-free signal evaluation
  • maintenance-free, buffered backup clock for at least three days
  • automatic handling of the leap second

Sản phẩm khác

  • VCL-2145-LC, GPS Primary Reference Clock (PRC)

    VCL-2145-LC, GPS Primary Reference Clock (PRC)

    GPS Primary Reference Clock (PRC) provides 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits clock outputs with high stability OCXO Holdover Clock. Rubidium Clock option available.

  • VCL-2145-SLV, PTP IEEE-1588v2 Slave Clock

    VCL-2145-SLV, PTP IEEE-1588v2 Slave Clock

    PTP Slave Clock for ToD and Frequency Synchronization - synchronizes to PTP Grandmaster to provide IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits clock outputs. OCXO and Rubidium Holdover Clock options available

  • NTP100-GPS

    NTP100-GPS

    Stratum 1 NTP server locked to GPS satellites for legally traceable time-stamping.

  • NTP100-TC

    NTP100-TC

    NTP server synchronized to time code input with automatic time code source detection. Supports SMPTE (30/25/25 fps), Leitch Date Encoding Standard, IRIG-B pulse width coded (unmodulated) DC, IEEE 1344 standard, IRIG-B(1) 1 kHz Amplitude Modulated, IEEE 1344 standard

  • NTP100-OSC

    NTP100-OSC

    Stand-alone NTP server with internal precision temperature controlled crystal oscillator.

  • GMR1000

    GMR1000

    The GMR1000 is high-precision, multi-function master clocks that can act as an NTP server, PTP grandmaster, time code generator or frequency reference.

  • GMR5000

    GMR5000

    The GMR5000 is high-precision, multi-function master clocks that can act as an NTP server, PTP grandmaster, time code generator or frequency reference.

  • GPS Module 6875 LAN

    GPS Module 6875 LAN

    Module 6875 is a GPS Time Server in a compact aluminium housing for 35mm DIN rail mounting (DIN EN 60715 TH35).

  • GPS Module 6870

    GPS Module 6870

    Module 6870 is a GPS clock in a compact aluminium housing for 35mm DIN rail mounting (DIN EN 60715 TH35). The module is easily clipped onto the rail via a clip based on "snap-in" mechanism.

Hotline: 0919.900.247