Trang chủ / Sản phẩm /

NTP100-GPS

Stratum 1 NTP server locked to GPS satellites for legally traceable time-stamping.


The NTP100-GPS is an NTP (Network Time Protocol) server that synchronizes to GPS satellites and distributes NTP reference signals via Ethernet. When synchronized to the atomic clocks in GPS and GLONASS satellites, the long term accuracy of the device is the same as the atomic clock of the GNSS. An internal TCXO (temperature-compensated crystal oscillator) provides holdover stability of ± 1 min/year during GPS signals loss. An optional OCXO (oven-controlled crystal oscillator) increases holdover stability to ± 250ms/year. 


  • Provides time legally-traceable UTC
  • NTP output accuracy of ± 2 ms
  • Synchronized to atomic clocks in GPS satellites for Stratum 1 accuracy
  • Typical holdover stability of ± 1 min/year using high precision internal TCXO during GPS loss
  • High-stability option with OCXO provides typical stability of ± 250 ms/year
  • Time stamp precision of 5-10 ms
  • NTP query (unicast), multicast, or broadcast modes
  • Assignable network configuration
  • Configuration via Telnet/SSH or included WinDiscovery
  • IPv4/IPv6 compatible
  • MD5 authentication

 

Time Reference  

When synchronized to atomic clocks in GPS satellites the long term accuracy of the NTP100 is the same as the atomic clock of the GPS
After initial synchronization and (if) upon loss of GPS signal the NTP100 will revert to an internal temperature compensated crystal oscillator and typically maintain accuracy of

Power Supply  

DC input (9-28 VDC)
Power consumption: <7.5W
Includes an external 24 VDC wall-mount power supply with locking DC plug, UL & CE listed

Connectors 

RJ45 ─ 10/100 MB
DC input ─ 2.1 mm male jack
Antenna ─ SMA
RS-232 – 9 pin male
USB – for configuration via WinDiscovery

Network Compatibility  

NTP unicast, multicast, or broadcast mode
Supports:

  • NTP v2 (RFC 1119)
  • NTP v3 (RFC 1306)
  • NTP v4 (RFC 5905)

DHCPv4, DHCPv6 for automatic acquisition of network address, name servers, and timeserver configuration
Telnet/SSH communication
IPv4/IPv6 compatible
SNMP with custom MIB

Rack Mount  

Optional RM4 rack mount kit available

Physical Size

6.44 x 4.06 x 1.44 in (16.35 x 10.32 x 3.65 cm)
16 oz (453.6 g)

Case  

Cover: black aluminum
Front/rear panel: clear anodized aluminum

Compliance  

CE Marked – Available for sale in EU
FCC, Part 15, Class B, emissions

Sản phẩm khác

  • VCL-2145-LC, GPS Primary Reference Clock (PRC)

    VCL-2145-LC, GPS Primary Reference Clock (PRC)

    GPS Primary Reference Clock (PRC) provides 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits clock outputs with high stability OCXO Holdover Clock. Rubidium Clock option available.

  • VCL-2145-SLV, PTP IEEE-1588v2 Slave Clock

    VCL-2145-SLV, PTP IEEE-1588v2 Slave Clock

    PTP Slave Clock for ToD and Frequency Synchronization - synchronizes to PTP Grandmaster to provide IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits clock outputs. OCXO and Rubidium Holdover Clock options available

  • NTP100-TC

    NTP100-TC

    NTP server synchronized to time code input with automatic time code source detection. Supports SMPTE (30/25/25 fps), Leitch Date Encoding Standard, IRIG-B pulse width coded (unmodulated) DC, IEEE 1344 standard, IRIG-B(1) 1 kHz Amplitude Modulated, IEEE 1344 standard

  • NTP100-OSC

    NTP100-OSC

    Stand-alone NTP server with internal precision temperature controlled crystal oscillator.

  • GMR1000

    GMR1000

    The GMR1000 is high-precision, multi-function master clocks that can act as an NTP server, PTP grandmaster, time code generator or frequency reference.

  • GMR5000

    GMR5000

    The GMR5000 is high-precision, multi-function master clocks that can act as an NTP server, PTP grandmaster, time code generator or frequency reference.

  • GPS Module 6875 LAN

    GPS Module 6875 LAN

    Module 6875 is a GPS Time Server in a compact aluminium housing for 35mm DIN rail mounting (DIN EN 60715 TH35).

  • GPS Module 8029NTS

    GPS Module 8029NTS

    Time Server 8029NTS for DIN Rail mounting – compact and highly flexible at the same time

  • GPS Module 6870

    GPS Module 6870

    Module 6870 is a GPS clock in a compact aluminium housing for 35mm DIN rail mounting (DIN EN 60715 TH35). The module is easily clipped onto the rail via a clip based on "snap-in" mechanism.

Hotline: 0919.900.247