Viễn thông - IT
Truyền thông công nghiệp
Tổng đài IP-PBX 
Năng lượng
Thiết bị điện nhẹ
Bộ đàm - Camera giám sát
GPS Module 8030NTS
Compact - space-saving - highly precise - maintenance free!
Compact - space-saving - highly precise - maintenance free!
This is the hopf network timeserver 8030NTS/GPS, easily explained.
With its up to 2 isolated and mutually independent network timeserver modules and up to 4 ethernet interfaces the network timeserver 8030NTS/GPS for DIN rail mounting is the ideal solution ensuring enhanced security for business critical and even most demanding applications!
Base system 8030NTS/GPS is equipped with 1 network timeserver module by default:
- 2 ethernet interfaces 10/100/1000 Mbit/s autosensing
- Network Time Protocol (NTP) Version 4 (RFC5905)
To ensure enhanced security and availability in redundant networks one isolated, independent network timeserver module 8030NTS/M may be integrated in the base system at time of purchase.
Optionally the network timeserver 8030NTS/GPS may also be equipped with numerous time synchronization modules for the output of:
- IRIG-B (modulated / unmodulated)
- DCF77 (modulated / unmodulated)
- Cyclic Pulses (PPS, PPM, etc.)
- Serial time datagram
The mentioned output modules are available in various electrical signal output versions as well as modules for fiber optic output.
You may also decide on purchase which power supply to be configured for you:
| Power supply - standard delivery with: | Power supply - optionally available with: |
|
|
Even more flexibility required?!
Activate additional functions per network timeserver module on site after purchase of the appliance by entering a serial number-dependent activation key.
|
- Space-saving clock system in closed aluminium profile housing for easy and horizontal DIN rail mounting according to DIN EN 60715 TH35
- Important information for implementing and about operating status available via status-LEDs at the front panel (if WebGUI access is not available)
- Simple, complete and safe operation and parameterisation (password protection and activatable https protocol) via password-protected WebGUI (optional SSH/Telnet)
- 22-channel GPS receiver for L1 frequency (1,575.42 MHz) integrated
- One integrated timeserver module per default with:
- 2 ethernet interfaces 10/100/1000 Mbit/s autosensing
- Network Time Protocol (NTP) version 4 (RFC5905)
- Improved security ensured by
- Symmetric keys
- Autokey
- Access restriction
- Deactivation of non-used network protocols
- Cost-efficient extension of the base system with additional output modules ex works (modular order concept) possible
- Synchronization status output via optical coupler
- Redundant multiple validation of the synchronization signal for an error-free and leap-free signal evaluation
- SyncOFF Timer (reception failure bypassing) for accurate operation even based on difficult reception conditions
- High freewheel accuracy provided by GPS supported regulation of the internal quartz basis, various quartz versions available
Sản phẩm khác
VCL PTP IEEE-1588v2 Slave Clock for ToD and Frequency Synchronization
VCL-GPS IEEE-1588v2, NTP Server (IPv4 and IPv6), provides IRIG-B, 1PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits GPS referenced clock outputs.
Redundant GPS, Primary Reference Clock with IEEE-1588v2 PTP and NTP
VCL-2145 is a high-performance GPS Primary reference clock and IEEE-1588v2 PTP that provides ITU-T G.811 primary synchronization freferences which are locked to a user selected satellite source.
VCL-2145-LC, GPS Primary Reference Clock (PRC)
GPS Primary Reference Clock (PRC) provides 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits clock outputs with high stability OCXO Holdover Clock. Rubidium Clock option available.
Primary Reference Clock with IEEE-1588v2 PTP Grandmaster and NTP
VCL-GPS-2145 Master: Provides IRIG-B, 1PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits GPS referenced clock outputs.
Redundant GPS, Primary Reference Clock with IEEE-1588v2 PTP Grandmaster
VCL-GPS-2145-D Grandmaster: Provides IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits GPS referenced clock outputs.
VCL-2145-SLV, PTP IEEE-1588v2 Slave Clock
PTP Slave Clock for ToD and Frequency Synchronization - synchronizes to PTP Grandmaster to provide IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits clock outputs. OCXO and Rubidium Holdover Clock options available
VCL-2112-SLV-LC, PTP IEEE-1588v2 Slave Clock
PTP Slave Clock for ToD and Frequency Synchronization-synchronizes to PTP Grandmaster to provide IRIG-B, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits
NTP100-GPS
Stratum 1 NTP server locked to GPS satellites for legally traceable time-stamping.
NTP100-TC
NTP server synchronized to time code input with automatic time code source detection. Supports SMPTE (30/25/25 fps), Leitch Date Encoding Standard, IRIG-B pulse width coded (unmodulated) DC, IEEE 1344 standard, IRIG-B(1) 1 kHz Amplitude Modulated, IEEE 1344 standard
NTP100-OSC
Stand-alone NTP server with internal precision temperature controlled crystal oscillator.
GMR1000
The GMR1000 is high-precision, multi-function master clocks that can act as an NTP server, PTP grandmaster, time code generator or frequency reference.
GMR5000
The GMR5000 is high-precision, multi-function master clocks that can act as an NTP server, PTP grandmaster, time code generator or frequency reference.
GPS Module 6875 LAN
Module 6875 is a GPS Time Server in a compact aluminium housing for 35mm DIN rail mounting (DIN EN 60715 TH35).
GPS Module 8029NTS
Time Server 8029NTS for DIN Rail mounting – compact and highly flexible at the same time
GPS Module 6870
Module 6870 is a GPS clock in a compact aluminium housing for 35mm DIN rail mounting (DIN EN 60715 TH35). The module is easily clipped onto the rail via a clip based on "snap-in" mechanism.