Modem G.SHDSL Loop-H3300
The Loop-H3300-3S is an addition to our H3300 family of CPE products that are based on the G.SHDSL transmission standard. They use the standard 16/32-TCPAM line format over
- 1-pair/2-pair/1+1 G.SHDSL mode selectable
- 1 pair G.SHDSL.bis
- Dying Gasp report function on 2-pair G.SHDSL Mode (manufacturing option)
- STU-C (master) or STU-R (slave) mode selectable
- E1 (120 ohm) / T1 software configurable
- Support router or bridge mode
- Built in self-test, loopback and QRSS functions interface hybrid co-existence in one chassis
- Local/remote management through console port, LAN, or WAN
- Log-in and password security protection
- VT100 Firmware Download
- Support configuration upload/download
- SNMP and Telnet are supported
- Multi-color LED indicators
- Optional front panel keys and 2-line by 16-character LCD display
- Standard compliance:
- G.SHDSL: ITU-T G.991.2 Annex A, B
- G.SHDSL.bis: ITU-T G.991.2 Annex F
Sản phẩm khác
Loop-IP6700 TDMoEthernet
Loop-IP6700 TDMoEthernet is used to transport TDM traffic over IP network, in addition to Ethernet traffic. As the core communications network migrates from TDM to IP, the
IP6704A TDMoEthernet
The Loop-IP6704A device allows operators to transport E1 ,T1*, E&M, X.21, or RS232 data stream with timing information over PSN (Packet Switched Network) via Pseudowire Protocol – SAToP/CESoPSN/MEF8*.
Loop-IP6510 Multiple WAN Router/Bridge
The Loop-IP6763 transports E1/T1 plus STM-1 signals over an IP network.
V4300 Mini DACS E1/T1 Converter
The Loop-V4300 Mini DACS E1/T1 converter provides both DS0 and n x 64 Kbps cross-connect between any T1 and E1 ports and E1 to T1 format conversion functions.