RS-232 extender: Extends the communication distance of serial port RS-232 to 12 kilometers
AN-EXT-RS-232 extends full-duplex transmission of asynchronous data over four wires (two twisted pairs).
AN-EXT-RS-232 extends full-duplex transmission of asynchronous data over four wires (two twisted pairs). The data transmission between each line driver utilizes differential signaling that is immune to electrical interference and therefore makes it ideal for use in light manufacturing and industrial office areas. It can run up to speeds of 57.6 kbps.
- Product features:
◆ Prolong the communication distance of serial port RS-232 to 12 kilometers
◆ Balance current transmission, powerful anti-jamming capacity
◆ Adopt photoelectric isolation to prevent devices damaged by ground loop and surge
◆ Isolation voltage up to 3500V
◆ Support RS-232asynchronous communication standard
◆ Directly insert RS-232interface, convenient operation
◆ Need no external power supply
◆ Use special communication line and common lead.
◆ Transmission speed up to 57.6kbps
◆ Full duplex or simplex mode, compact size - Performance parameters:
◆ Interface: one port conforms to EIA RS-232 and CCITT V.24
Asynchronous protocol, the other uses special 4-core cooper wire
◆ Connector: one side of RS-232 uses DB9 hole connector
The circuit side uses DB9 pin connector
◆ Transmission mode: asynchronous, full duplex or simplex
◆ Distance: 24AWG lead for 12KM @600BPS
24AWG lead for 1KM @38.4KBPS
24AWG lead for 100M @57.6KBPS
◆ Isolation voltage :3500@1S or 7500V impulse
◆ Speed: maximum asynchronous 57.6KBPS
◆ Power supply: serial port self power supply
◆ Size: 6.8×3.4×1.6cm
◆ Weight: 40g
◆ Working environment: -20 to 65C0 (0%to95%RH) - Application fields:
◆ Point to point RS-232 communication
◆ Multi-user system
◆ Remote terminal
◆ Multi-user terminal connected with host
◆ RS-232 remote control system
◆ Program controlled exchanger charge terminal
◆ Satellite receiver
◆ Remote page system
Interface: one port conforms to EIA RS-232 and CCITT V.24
Asynchronous protocol, the other uses special 4-core cooper wire
Connector: one side of RS-232 uses DB9 hole connector
The circuit side uses DB9 pin connector
Transmission mode: asynchronous, full duplex or simplex
Distance: 24AWG lead for 12KM @600BPS
24AWG lead for 1KM @38.4KBPS
24AWG lead for 100M @57.6KBPS
Isolation voltage:3500@1S or 7500V impulse
Speed: maximum asynchronous 57.6KBPS
Power supply: serial port self power supply
Size: 6.8×3.4×1.6cm
Weight: 40g
Working environment: -20 to 65C0 (0%to95%RH)
Connectors and signals
DB-9 female connector on the RS-232 side and DB-9 male connector on the line side.
RS-232 Side:
Connector: DB-9 Female.
Signals: Use Pins 3 (RD) and Pin 2(TD also called SD) Pins 7 (RTS) and Pin 8 (CTS) are tied together Pins 4 (DTR), 6 (DSR), and 1 (CD) are tied together.
Line Side:Use Pin2(R+),Pin3(T+),Pin4(T-),Pin5(R-)
Product Description
AN-EXT-RS-232 extends full-duplex transmission of asynchronous data over four wires (two twisted pairs). The data transmission between each line driver utilizes differential signaling that is immune to electrical interference and therefore makes it ideal for use in light manufacturing and industrial office areas. It can run up to speeds of 57.6 kbps.
Sản phẩm khác
-
Ethernet to V.35 converter
Ethernet to V.35 converter provide conversion from V.35 channel to Ethernet interface, and delivers Ethernet services over existing V.35 lines, RJ-45 type port for Ethernet.
-
Port Powered RS-232 to RS-422 Interface Converter
AN-PP-RS-232-422 is a lightweighted, compact and robust port powered RS-232 to RS-422 Interface Converter
-
RS-232 to CMOS/TTL converter
AN-RS-232-TTL converter provides low cost solution for converting the RS-232 serial com port generated signals to CMS/TTL level signals for prototype or testing low level microprocessor or microcontroller based systems
-
Port Powered RS-232 to RS-485 Interface Converter (4-bit terminal)
AN-PP-RS-232-485 is a lightweighted, compact and robust port powered RS-232 to RS-422 Interface Converter
-
Port Powered RS-232 To RS-485 Interface Converter
Port Powered RS-232 To RS-485 Interface Converter (6-bit terminal)
-
Port Powered ultra-high Speed RS-232 To RS-485 Interface Converter
AN-PP-RS-232-485/NH is a lightweighted, compact and robustultra-high speed port powered RS-232 to RS-485 Interface Converter
-
RS-232 to RS-422/485 Photoelectric Isolation Interface Converter
AN-PH-RS-232/422/485 is RS-232 to RS-422/485 Photoelectric Isolation Interface Converter
-
RS-232 to RS-422/485 Isolated bi-directional Interface Converter
The AN-OS-RS-232/422/485 is a series of a bi-directional interface converters.
-
Industrial Class Wall-Mounted Photo-isolation RS-232/RS-422/RS-485 Interface Converter
AN-ISWM-RS-232/422/485 Industrial Class Wall-Mounted Photo-isolation Interface Converter is compatible with RS-232C, RS-422, RS-485
-
Port-Powered RS-232 Isolator, 9 Pin, 2 Channel
AN-IS-RS232 optically isolates and protects the transmit and receive lines of your RS-232 port from ground loops and power surges up to 2500V RMS for one minute.
-
Full metal housing, anti-static, powerful anti-jamming capacity RS-422/485 Photoelectric Isolation Data Repeaters
AN-DR-RS-422-485 data repeater is a kind of data relay communication product of photoelectric isolated RS-422/RS-485.
-
4-port/8-port RS-485 hub
AN-H-RS485-4(8) is a RS-485 bus split hub specially designed to meet the demand of RS-485 system in complicated electromagnetic field environment, avilable in 4 and 8 port versions
-
RS-232- V.35 / X. 21 / RS-449 / RS-530 interface converter / protocol converter
AN-RS series interface converter provides RS-232 protocol conversion to V.35, X.21 or RS-449/RS530 interface full-duplex bi-directional mode.
-
AN-RS-485-MOD 1 port Mobdus gateway / converter
3-in-1 RS-232/422/485 interface Max.230Kbps Serial interface and 10/100 Mbps Ethernet MODBUS gateway / converter
-
NPort 5100A Series (Moxa) -1-port RS-232/422/485 serial device servers
The NPort® 5100A device servers are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network.
-
NPort 5100 Series 1-port RS-232/422/485 serial device servers
NPort 5100 device servers are designed to make serial devices network-ready in an instant. The small size of the servers makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN.
-
NPort P5150A Series :1-port RS-232/422/485 PoE serial device servers
NPort® P5150A device servers are designed to make serial devices network-ready in an instant. It is a power device and is IEEE 802.3af compliant, so it can be powered by a PoE PSE device without an additional power supply.
-
NPort 5200 Series: 2-port RS-232/422/485 serial device servers
The NPort 5200 serial device servers are designed to make your industrial serial devices Internet-ready in no time. The compact size of NPort 5200 serial device servers makes them the ideal choice for connecting your RS-232 (NPort 5210/5230/5210-T/5230-T)
-
NPort 5600 Series: 8 and 16-port RS-232/422/485 rackmount serial device servers
Features and Benefits
- Standard 19-inch rackmount size
- Easy IP address configuration with LCD panel (excluding wide-temperature models)
- Configure by Telnet, web browser, or Windows utility
- Socket modes: TCP server, TCP client, UDP
- SNMP MIB-II for network management
- Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
- Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)