Trang chủ / Sản phẩm /

Video over Fiber Converter VF-402-KIT

4-Channel Video over Fiber Bundled Kit

»   VF-402-KIT

 

The VF-402-KIT consists of 4-channel video over fiber optical transceiver and receiver to transmit video and RS485 signal through a reliable single mode or single fiber link. It is an ideal cost-effective solution for surveillance system that requires high display quality and high-performance signal transmission over long distances. The VF-402-KIT can be installed easily by way of “Plug and Play”, meaning the operator does not need to configure the pair of the video over fiber transmission in advance.

Typical Applications

  • Intelligent Transportation Systems (ITS)
  • Toll Collection
  • Traffic Surveillance
  • Air Traffic Management (ATM)
  • Rail Signaling
  • Perimeter Alarms and Area Monitoring
  • Telemedicine and Teleconference
  • Industrial Surveillance
  • Intelligent Building
  • CCTV Network

 

 

Video Characteristics
Video Channel 4-channel bi-direction
Video Connector BNC
Supported Video Type 1080p: AHD/TVI/CVI
480p: CVBS
Video Input/Output Impedance 75ohm/unbalanced interface
Video Input/Output Voltage 1.0 Vpp / typical peak-to-peak value
Video Bandwidth 25 to 60MHz
Video Digital Bit Width 8/10 bit
Differential Gain (DG) < 2% (typical value)
Differential Phase (DP) < 2° (typical value)
SNR-weighted Scheme > 67dB (typical value)
Data Interface
Data Channel 4 channels
Physical Protocol RS485
Operation Mode Simplex
Data Connector 4 Pin terminal block with screw clamps
Data Rate DC-150Kbps
Data Distance RS485: 0-20km
BPS 0-115.2Kbps
Bit Error Rate (BER) < 10-9
Optical Interface
Optical Connector FC
Fiber Type Single-mode, single fiber
Distance 20km for single mode
Optical Wavelength VF-402-T
TX: 1310nm
RX: 1550nm

VF-402-R
TX: 1550nm
RX: 1310nm
Transmitter Coupled Power Max.: 0dBm
Min.: -8dBm
Receive Sensitivity -22dBm
Link Budget From 15dB to 20dB at 1310nm or 1550nm
Cable 9/125μm single-mode cable
Hardware Specifications
LED Indicators
  • Power
  • Each channel
  • Link (fiber optic)
Dimensions (W x D x H) 157 × 116.5 × 48 mm
Weight 580g
Power Requirement 5V DC, 2A
Chassis Current Consumption 1.10 amp for 4-channel video and 1-channel data
Mechanical Metal
Standards Conformance
Regulatory Compliance FCC, CE
Environment
Operating Temperature: -20 ~ 70 degrees C
Relative Humidity: 0 ~ 95% (non-condensing)
Storage Temperature: -40 ~ 85 degrees C
Relative Humidity: 0 ~ 95% (non-condensing)
Standard Accessories
Packet Contents VF-402-T x 1
VF-402-R x 1
User’s manual x 1
5V/2A power adapter x 2

Sản phẩm khác

  • PLANET XT-705A

    PLANET XT-705A

    10G/5G/2.5G/1G/100M Copper to 10GBASE-X SFP+ Media Converter

     

Hotline: 0919.900.247