Ethernet over Phone Wire VC-234G
4-Port 10/100/1000T Ethernet to VDSL2 Bridge - 30a profile w/ G.vectoring, RJ11
» VC-234G
High Performance Gigabit Ethernet over Phone Wire Solution
PLANET VC-234G, a new-generation and high-performance Gigabit Ethernet-over-VDSL2 Converter, works well with a pervasive telephone line network with a symmetric (downstream/upstream) data rate of up to 150/150Mbps (G.INP, Sym, 8dB) over a distance of 300m and 20/12Mbps over a long distance of 1.4km. It is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely the fastest data transmission speed over the existing copper telephone lines without the need of rewiring.
With integrated support for the ITU-T’s new G.993.5 vectoring technology, the VC-234G works in conjunction with vectoring-enabled DSLAMs to remove crosstalk interference and improve maximum line bandwidth across the existing copper telephone infrastructure.
Implementing with Existing Telephone Copper Wires
The VC-234G is also a Long Reach Ethernet (LRE) Bridge providing four RJ45 Ethernet ports and two RJ11 phone jacks, in which one is for VDSL connection and the other one is for POTS (Plain Old Telephone Service) connection. The VC-234G has a built-in POTS splitter to share the existing phone line with POTS; therefore, there is no need to replace the existing copper wiring. Just plug the VC-234G into the existing RJ11 telephone jack and a high-performance VDSL2 network can be connected. The VC-234G is ideal to be used as an Ethernet extender to an existing Ethernet network.
Delivering High-demand Service Connectivity for ISP/Triple Play Devices
The VC-234G provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 200/100Mbps (G.INP, Asym, 8dB) asymmetric data transmission, the VC-234G enables many multi-media services to work on the local Internet, such as VoD (video on demand), voice over IP, video phone, IPTV, Internet caching server, distance education, and so on.
Easy and Flexible Installation
The Ethernet-over-VDSL2 Converter comes with a Plug-and-Play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-234G offers two modes, CPE and CO, for application -- CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For the point-to-point connection, a CPE mode and a CO mode must be set up as one pair of converters to perform the connection.
ADSL2+ Fallback
For those ISPs that still provide ADSL broadband service, the VC-234G can support a downstream rate of up to 24Mbps and an upstream rate of 1Mbps with the ADSL2+ technology. The VC-234G can also be directly switched over to VDSL2 after the network upgrade.
- ITU-T G.993.5 G.Vector and G.INP
- DMT-based coding technology
- Built-in POST splitter to share voice and date
- One RJ11 connector for VDSL port with VDSL connection
- One phone connector for telephone connection
- Voice and data communication can be shared simultaneously based on the existing telephone wire
- CO/CPE mode selectable via DIP switch
- Selectable target band plan and SNR margin
- Up to 200/100Mbps (G.INP, Asym, 8dB) bandwidth
- 4 10/100/1000BASE-TX LAN ports
- Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u, 100BASE-TX and IEEE 802.3x, flow control Ethernet standards
- Half duplex back pressure and IEEE 802.3x full duplex pause frame flow control
- Supports IEEE 802.1Q VLAN tag transparency
- VDSL2 stand-alone transceiver for simple bridge modem application
- Advantage of minimum installation time (Simply Plug-and-Play)
- Supports extensive LED indicators for network diagnosis
- Compact in size and easy to install
Hardware Specifications | |
---|---|
LAN Ports | 4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
VDSL Port | 1 VDSL2 RJ11 female phone jack Twisted-pair telephone wires (AWG24 or better) up to 1.4km |
Phone Port | 1 RJ11, built-in splitter for POTS connection |
Dimensions (W x D x H) | 154.6 x 86.0 x 26.3 mm |
Weight | 350g |
Power Requirements | 5V DC, 2A external power |
LED Indicators | 1 power: Green 4 1000BASE-T LNK/ACT: Green 4 100BASE-TX LNK/ACK: Green 1 VDSL: Green 1 CO: Green 1 CPE: Green |
Housing | Metal |
DIP Switch & Functionality | 4-position DIP switch
|
Switch Specifications | |
Switch Processing Scheme | Store-and-Forward |
Address Table | 2K entries |
Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
Jumbo Packet Size | 9K bytes |
System Specifications | |
VDSL Compliance | VDSL-DMT ITU-T G.993.1 VDSL ITU-T G.997.1 ITU-T G.993.2 VDSL2 (Profile 17a/30a Support) ITU-T G.993.5 G.vectoring ITU-T G.998 G.INP |
ADSL Compliance | Capable of ADSL2/2+ standard
Data Rate: Up to 24Mbps |
Performance* (Downstream/Upstream) |
Interleave, Asym, 8dB 200M ----> 193Mbps/89Mbps 400M ----> 164Mbps/69Mbps 600M ----> 112Mbps/39Mbps 800M ----> 70Mbps/14Mbps 1000M --> 46Mbps/7Mbps 1400M --> 21Mbps/4Mbps Interleave, Sym, 8dB 200M ----> 142Mbps/139Mbps 400M ----> 116Mbps/118Mbps 600M ----> 70Mbps/73Mbps 800M ----> 50Mbps/40Mbps 1000M --> 24Mbps/24Mbps 1400M --> 10Mbps/6Mbps G.INP, Asym, 8dB 200M ----> 200Mbps/100Mbps 400M ----> 170Mbps/68Mbps 600M ---->113Mbps/37Mbps 800M ----> 70Mbps/18Mbps 1000M --> 51Mbps/7Mbps 1400M --> 24Mbps/2Mbps G.INP, Sym, 8dB 200M ----> 150Mbps/150Mbps 400M ----> 120Mbps/126Mbps 600M ----> 73Mbps/78Mbps 800M ----> 48Mbps/43Mbps 1000M --> 27Mbps/26Mbps 1400M --> 10Mbps/5Mbps Interleave, Asym, 12dB 200M ----> 180Mbps/80Mbps 400M ----> 145Mbps/57Mbps 600M ----> 95Mbps/32Mbps 800M ----> 60Mbps/13Mbps 1000M --> 39Mbps/6Mbps 1400M --> 18Mbps/2Mbps Interleave, Sym, 12dB 200M ----> 137Mbps/129Mbps 400M ----> 99Mbps/102Mbps 600M ----> 54Mbps/61Mbps 800M ----> 41Mbps/35Mbps 1000M --> 22Mbps/19Mbps 1400M --> 7Mbps/3Mbps G.INP, Asym, 12dB 200M ----> 185Mbps/90Mbps 400M ----> 150Mbps/60Mbps 600M ----> 94Mbps/36Mbps 800M ----> 61Mbps/14Mbps 1000M --> 44Mbps/6Mbps 1400M --> 21Mbps/1Mbps G.INP, Sym, 12dB 200M ----> 142Mbps/136Mbps 400M ----> 103Mbps/110Mbps 600M ----> 57Mbps/65Mbps 800M ----> 38Mbps/36Mbps 1000M --> 14Mbps/13Mbps 1400M --> 8Mbps/3Mbps *Note: As there are various resistance values in the category of RJ11 cable, the actual data rate will vary on the quality of the copper wire and environmental factors. |
Standards Conformance | |
Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-duplex flow control IEEE 802.1p Class of Service ITU-T G.993.1 VDSL ITU-T G.997.1 ITU-T G.993.2 VDSL2 (Profile 17a/30a support) ITU-T G.993.5 G.Vectoring & G.INP ITU-T G.998 |
Sản phẩm khác
-
PLANET XT-705A
10G/5G/2.5G/1G/100M Copper to 10GBASE-X SFP+ Media Converter
-
Managed Media Converter Chassis
16-Slot Managed Media Converter Chassis with Redundant Power Supply System
MC-1610MR / MC-1610MR48
-
Unmanaged Media Converter Chassis MC-1500
15-Slot Media Converter Chassis
-
Unmanaged Media Converter Chassis MC-1500R
15-Slot Media Converter Chassis (AC Power)
» MC-1500R
-
Unmanaged Media Converter Chassis MC-1500R48
15-Slot Media Converter Chassis (DC Power)
» MC-1500R48
-
Unmanaged Media Converter Chassis MC-700
7-Slot Media Converter Chassis
» MC-700
-
Chassis Managed Gigabit Media Converter GST-80X Series
10/100/1000BASE-T to 1000BASE-SX/LX Smart Media Converter
» GST-80X Series
-
Managed Gigabit Ethernet Media Converter GT-90x Series
Managed Gigabit Ethernet Media Converter
» GT-90x Series
-
Standard Gigabit Media Converter GT-1205A
10/100/1000BASE-T to Dual 100/1000BASE-X SFP Media Converter
» GT-1205A
-
Standard Gigabit Media Converter GT-80x Series
10/100/1000BASE-T to 1000BASE-SX/LX Gigabit Media Converter
» GT-80x Series
-
Standard Gigabit Media Converter IGT-1205AT
Industrial 10/100/1000T to 2-port 100/1000X SFP Media Converter
» IGT-1205AT
-
Standard Gigabit Media Converter IGT-805AT
Industrial 10/100/1000BASE-T to 100/1000BASE-X SFP Media Converter (-40~75 degrees C)
» IGT-805AT
-
Standard PoE Gigabit Media Converter GTP-80x Series
100/1000BASE-X to 10/100/1000BASE-T PoE+ Media Converter
» GTP-80x Series
-
Chassis Managed Fast Ethernet Media Converter FST-80x Series
10/100BASE-TX to 100BASE-FX Smart Media Converter
» FST-80x Series
-
Standalone Managed Fast Ethernet Media Converter FT-90x Series
10/100Base-TX to 100Base-FX Web Smart Media Converter
» FT-90x Series
-
Standard Fast Ethernet Media Converter FT-80x Series
10/100Base-TX to 100Base-FX Bridge Media Converters
» FT-80x Series
-
Standard PoE Fast Ethernet Media Converter FTP-802 / FTP-802S15
100Base-FX to 10/100Base-TX PoE Media Converter
» FTP-802 / FTP-802S15
-
Ethernet over Phone Wire VC-231GP
1-Port 10/100/1000T 802.3at PoE+ Ethernet to VDSL2 Converter
» VC-231GP
-
Ethernet over Phone Wire VC-231GF
1-Port 1000BASE-X SFP + 1-Port RJ11 VDSL2 Converter
» VC-231GF
-
Ethernet over Phone Wire VC-231G
1-Port 10/100/1000T Ethernet to VDSL2 Converter -30a profile w/ G.vectoring, RJ11
» VC-231G