Trang chủ / Sản phẩm /

Ethernet over Coaxial VC-232G

1-Port 10/100/1000T Ethernet over Coaxial Converter

»   VC-232G

High Performance Gigabit Ethernet over Coaxial Solution 

To fulfill the needs of long distance and higher speed required Ethernet over Coaxial applications, PLANET Technology offers a new-generation Ethernet over Coaxial Converter, VC-232G. It features 1 10/100/1000BASE-T RJ45 port and 1 BNC female connector with a compact-sized metal housing, making the placement of the unit convenient. Working well with a pervasive coaxial network, the VC-232G provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.4km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable to another 100-meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage.

 

Superior Upstream and Downstream Transmission

The VC-232G is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2).  The VC-232G offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes --  asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals.

　■ Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps
　■ Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps
The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range. In all, when the VC-232G is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance.

 

IP Ethernet over Long Distance Existing Coaxial Cables

The VC-232G is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from existing analog system to full digital system. A normal UTP cable can only be extended up to 100 meters, but with the VC-232G, the distance for Ethernet networking can be extended up to 1,400 meters (4,593ft.), which is ideal for the following network applications:

　■ Long-distance IP network devices
　■ IP digital signage
　■ Cable TV to IPTV
　■ Distance video education
　■ Electronic billboards
　■ Other applications

If you have coaxial cable in your existing environment, you can install a pair of the VC-232G very simply without the need to build additional network wires, thus saving costs for network construction.

 

Easy and Flexible Installation

The VC-232G offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one VC-232G in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better.


 
Hardware Specifications
TP interface 1 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
VDSL Interface 1 BNC female Ethernet over Coaxial

Cabling
Coaxial cable: 75 ohm
RG-6/U cable, less than12Ω/1000 ft
RG-59/U cable, less than 30Ω/1000 ft.

Maximum Distance
Max. 1400m with data transmission (4,593ft.)
Functionality DIP-1: Select CO or CPE mode
DIP-2: Select G.INP or Interleaved mode
DIP-3: Select Band Profile (Asymmetric or Symmetric)
DIP-4: Select SNR of 12dB or 8dB
Dimensions (W x D x H) 70 x 97 x 26 mm
Weight 185g
Power Requirement DC 5V, 2A external power
LED Indicators Power: Green
1000BASE-T LNK/ACT: Green
VDSL: Green
CO: Green
CPE: Green
Housing Metal
Switch Specifications
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Flow Control Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
System Specifications
VDSL Compliance
  • VDSL-DMT
　ITU-T G.993.1 VDSL
　ITU-T G.993.1 VDSL
　ITU-T G.997.1
　ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
　ITU-T G.993.5 G. Vectoring
　ITU-T G.998
　G.INP
Standards Conformance
Standards Compliance IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-duplex flow control
IEEE 802.1p Class of Service
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
ITU-T G.993.5 G.Vectoring and G.INP
ITU-T G.998
Regulatory Compliance FCC Part 15 Class A, CE
Environment
Temperature Operating: 0~50 degrees C
Storage: -10~70 degrees C
Humidity Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)
Performance
Coaxial Performance Interleave(Upstream/Downstream: Mbps)
　Asymmetric (8dB):
　200m ->88Mbps/168Mbps
　400m ->75Mbps/160Mbps
　600m ->59Mbps/129Mbps
　800m ->32Mbps/110Mbps

　Asymmetric (12dB):
　200m ->78Mbps/145Mbps
　400m ->69Mbps/137Mbps
　600m ->48Mbps/118Mbps
　800m ->26Mbps/94Mbps

　Symmetric (8dB):
　200m ->129Mbps/131Mbps
　400m ->117Mbps/122Mbps
　600m ->101Mbps/92Mbps
　800m ->62Mbps/73Mbps

　Symmetric (12dB):
　200m ->117Mbps/123Mbps
　400m ->102Mbps/102Mbps
　600m ->88Mbps/82Mbps
　800m ->47Mbps/56Mbps


G.INP(Upstream/Downstream: Mbps)
　Asymmetric (8dB):
　200m ->95Mbps/200Mbps
　400m ->82Mbps/175Mbps
　600m ->59Mbps/151Mbps
　800m ->37Mbps/122Mbps

　Asymmetric (12dB):
　200m ->89Mbps/181Mbps
　400m ->71Mbps/156Mbps
　600m ->46Mbps/136Mbps
　800m ->30Mbps/102Mbps

　Symmetric (8dB):
　200m ->147Mbps/147Mbps
　400m ->132Mbps/135Mbps
　600m ->108Mbps/104Mbps
　800m ->76Mbps/78Mbps

　Symmetric (12dB):
　200m ->138Mbps/143Mbps
　400m ->116Mbps/120Mbps
　600m ->91Mbps/89Mbps
　800m ->58Mbps/60Mbps


Note: As there are various resistance values in the category of RG-59/U or RG-6/U cable, the actual data rate will vary on the quality of the copper wire and environmental factors.

Sản phẩm khác

  • PLANET XT-705A

    PLANET XT-705A

    10G/5G/2.5G/1G/100M Copper to 10GBASE-X SFP+ Media Converter

     

Hotline: 0919.900.247