Trang chủ / Sản phẩm /

ADSS: Tất cả các loại cáp quang điện môi lõi 2-288

Single Layer Aerial ADSS Cable is idea for installation in distribution as well as transmission
envirline installations are required as its name indicates, there is no support or messenger wire
required, so installation is achieved in a single pass.


Features of ADSS fiber optic cable:
1. It can be erected without powering off;
2. AT sheath, excellent electric tracking resistance;
3. Light weight, small cable diameter, reducing the influence of wind and ice, on the tower and support load, large span,
the largest span 200 meters;
4. With excellent tensile properties and temperature characteristics, life expectancy is greater than 30 years.

Advantages of GL ADSS Optical Fiber Cable:
1. Good aramid yarn have excellent tensile performance;
2. Fast delivery,200km ADSS cable regular production time about 10 days;
3. Can using glass yarn instead of aramid,to prevent mouse bite.


ADSS Cable Construction Parameter
No. of fibers 4-72fibers
FRP Strength Member Diameter 2.1 mm
Loose Tube Diameter 2.0 mm
Out Sheath Diameter 1.8 mm
Loose Tube Material PBT
Filling compound (Tube) Thixotropic Jelly
Water Blocking Water Swell able Material
Outer sheath material  Anti-tracking  for 35-110kv voltage
Span (meter) Weight(kg/km) Diameter(mm)             Initial Tension (N)
       Unload                 Load
12fibers
50 110 9.0~9.5~10.2~10.5 892 1479
100 110 9.0~9.5~10.2~10.5 1338 2043
150 110 12.2 2232 3286
200 110 12.2 3280 4800
   24fibers      
50 115 9.0~9.5~10.2~10.5 904 1486
150 115 12.2 2261 3304
200 115 12.2 3322 4826
ADSS Optical Fiber Parameter
Fiiber Type G652D
Mode Field Diameter 8.6~9.5±0.7μm
Cladding Diameter 125 ± 1μm
Cladding Non-Circularity:  ≤ 1%
Coating Diameter  245 ± 10μm
Attenuation Coefficient ≤ 0.36dB/km at 1310nm, ≤ 0.22dB/km at 1550nm
Chromatic Dispersion ≤3.5ps/nm/km at 1285~1330nm, ≤18ps/nm/km at 1550nm
Zero Dispersion Wavelength 1300~1322nm
PMD Coefficient ≤ 0.2ps/√km

Sản phẩm khác

  • Cáp ADSS có độ căng 10 đến 30KN

    Cáp ADSS có độ căng 10 đến 30KN

    The ADSS consits jelly-filled loose tubes, laid up around a central nonmetallic strength member.
    The cable is water blocked, aramid yarn reinforced and PE or AT sheathed. ADSS (All Dielectric Self-Supporting) Cable is suspended from poles or towers in telecommunication and power outside plant applications.

  • Cáp ADSS tự hỗ trợ toàn bộ cho khoảng cách 50-150M

    Cáp ADSS tự hỗ trợ toàn bộ cho khoảng cách 50-150M

    Product Name: ADSS Self-Supporting Aerial Fiber Cable
    Brand Place of Origin: GL Hunan,China (Mainland)
    Application: Self-Supporting , Aerial , Outdoor
    Supporting Strength: Aramid Yarn/Kevlar
    Span: 50-150 Meter(For Mini Span)
    Central Strength Member: FRP
  • ADSS nhịp dài 600-1600m

    ADSS nhịp dài 600-1600m

    Long Span ADSS provides reliable self-support performance for up to 1600 meters. Each Long Span ADSS cable is custom engineered for optimum placement on utility towers and to operate under full weather load, ensuring safe reliable lifetime performance. For installation on high-voltage lines up to 275 KV, an optional track-resistant jacket prevents dry-band arcing damage. Fiber counts is available up to 288 fibers. 

  • Cáp ADSS khoảng cách ngắn

    Cáp ADSS khoảng cách ngắn

    1.Suitable for use on distribution and high voltage transmission   lines with mini spans or self supporting installation for telecommunication ;
    2.Track -Resistant outer jacket available for the high voltage;
    3.Line where space potentials up to 35kv;
    4.Gel-Filled buffer tubes are S-Z stranded;
    5.Instead of Aramid yarn or glass yarn,there is no support or messenger wire required. Aramid yarn is used as the strength member to assure the tensile and strain performance for mini span (usually below 100 meters) ;
    6.The fiber counts from 4-288 fibers.

  • Cáp ADSS tự hỗ trợ toàn bộ một lớp

    Cáp ADSS tự hỗ trợ toàn bộ một lớp

    1.Suitable for use on distribution and high voltage transmission   lines with mini spans or self supporting installation for telecommunication ;
    2.Track -Resistant outer jacket available for the high voltage;
    3.Line where space potentials up to 35kv;
    4.Gel-Filled buffer tubes are S-Z stranded;
    5.Instead of Aramid yarn or glass yarn,there is no support or messenger wire required. Aramid yarn is used as the strength member to assure the tensile and strain performance for mini span (usually below 100 meters) ;
    6.The fiber counts from 4-288 fibers.

  • Cáp ADSS hai lớp

    Cáp ADSS hai lớp

    Double Layer Aerial ADSS Cable is used  for communication cable of overhead high-voltage electricity
    transmission system,it also can be used as communication cable at the areas where lighting is frequent
    or distance is big. Aramid yarn is used as the strength member to assure the tensile and strain Performance.
    Mainly installed at existing 220kV or lower voltage power lines . Two Jacket and stranded loose tube design 

  • FTTH Tự hỗ trợ cáp loại thép xoắn

    FTTH Tự hỗ trợ cáp loại thép xoắn

    Description
    The typical self-supporting bow-type drop fiber optic cable consists of GJXFH/GJXH cable,
    and an additional strength member (steel wire or 0.33mm*7 stranded steel wire).

    Application                                        
    1. High performance optical network operating;
    2. High speed optical routes in buildings (FTTX);
    All types of fiber cables with different structures.

    Temperature Range:
    Operating :-20℃ to 60℃
    Storage :-20℃ to 60℃
  • Cáp thả sợi FTTH 2 lõi ngoài trời

    Cáp thả sợi FTTH 2 lõi ngoài trời

    GJYXCH Bow Type Drop Cable Structure: optical fiber(s) is placed between two steel wire strength members, with self-supporting steel wire strength component, low smoke, non-halogen flame retardant outer sheath material.we supply 1 core fiber optic cable / multi core fiber optic cable.

  • Cáp thả trong nhà FTTH

    Cáp thả trong nhà FTTH

    Description
    The typical bow-type drop optical cable includes central optical fibers 
    with 2 parallel KFRP or steel wire as the strength members placed on both sides,
    a LSZH or PVC sheath is extruded outside.
    Application                                        
    1. All types of fiber cables with different structures
    2. High performance optical network operating
    3. High speed optical routes in buildings (FTTX)
    Temperature Range:
    Operating :-20℃ to 60℃
    Storage :-20℃ to 60℃

Hotline: 0919.900.247