Trang chủ / Sản phẩm /

ADSS nhịp dài 600-1600m

Long Span ADSS provides reliable self-support performance for up to 1600 meters. Each Long Span ADSS cable is custom engineered for optimum placement on utility towers and to operate under full weather load, ensuring safe reliable lifetime performance. For installation on high-voltage lines up to 275 KV, an optional track-resistant jacket prevents dry-band arcing damage. Fiber counts is available up to 288 fibers. 


Reliable Lifetime Performance
1.Exclusive fiber coating (single mode) for permanent embedded color & 2.Custom engineered for operation under full load
3. Optional track-resistant jacket prevents dry-band arcing damage for line voltages 275 kV ( 20kV space potential)
4.Guaranteed standards-based performance
 
Easy Cable Entry & Preparation
1.Ripcord speeds cable entry & outer jacket removal
2.Swellable binders speed cable preparation
 
According to IEEE 1222, IEC 60794-4-20, ANSI/ICEA S-87-640, TELCORDIA GR-20, IEC 60793-1-22, IEC 60794-1-2, IEC 60794 standards


Proven Long Span Installation & Use
1.Tailored designs span distances up to 2,500’ (760 m) without interrupting power
2.Higher count designs utilize 24 fiber per tube to reduce environmental load
3.Matching pole attachment hardware (dead-ends, suspension clamps)

Technical Parameter:

 Span (meter) Weight(kg/km) Diameter(mm)            Initial Tension (N)
    Unload                 Load
12 fibers per tube        
600 162 13.60 17500 17852
700 173 13.90 21600 22200
800 178 14.20 24200 24320
900 184 14.50 36200 36800
1000 189 14.80 42700 42950
1100 195 15.10 47300 47600
1200 201 15.40 52600 52960
1300 207 15.70 57200 57600
1400 212 16.00 62500 62800
1500 217 16.30 66300 66650
1600 223 16.60 68900 69263
 

Sản phẩm khác

  • Cáp ADSS có độ căng 10 đến 30KN

    Cáp ADSS có độ căng 10 đến 30KN

    The ADSS consits jelly-filled loose tubes, laid up around a central nonmetallic strength member.
    The cable is water blocked, aramid yarn reinforced and PE or AT sheathed. ADSS (All Dielectric Self-Supporting) Cable is suspended from poles or towers in telecommunication and power outside plant applications.

  • Cáp ADSS tự hỗ trợ toàn bộ cho khoảng cách 50-150M

    Cáp ADSS tự hỗ trợ toàn bộ cho khoảng cách 50-150M

    Product Name: ADSS Self-Supporting Aerial Fiber Cable
    Brand Place of Origin: GL Hunan,China (Mainland)
    Application: Self-Supporting , Aerial , Outdoor
    Supporting Strength: Aramid Yarn/Kevlar
    Span: 50-150 Meter（For Mini Span）
    Central Strength Member: FRP
  • Cáp ADSS khoảng cách ngắn

    Cáp ADSS khoảng cách ngắn

    1．Suitable for use on distribution and high voltage transmission   lines with mini spans or self supporting installation for telecommunication ;
    2．Track -Resistant outer jacket available for the high voltage;
    3．Line where space potentials up to 35kv;
    4．Gel-Filled buffer tubes are S-Z stranded;
    5．Instead of Aramid yarn or glass yarn,there is no support or messenger wire required. Aramid yarn is used as the strength member to assure the tensile and strain performance for mini span (usually below 100 meters) ;
    6．The fiber counts from 4-288 fibers.

  • Cáp ADSS tự hỗ trợ toàn bộ một lớp

    Cáp ADSS tự hỗ trợ toàn bộ một lớp

    1．Suitable for use on distribution and high voltage transmission   lines with mini spans or self supporting installation for telecommunication ;
    2．Track -Resistant outer jacket available for the high voltage;
    3．Line where space potentials up to 35kv;
    4．Gel-Filled buffer tubes are S-Z stranded;
    5．Instead of Aramid yarn or glass yarn,there is no support or messenger wire required. Aramid yarn is used as the strength member to assure the tensile and strain performance for mini span (usually below 100 meters) ;
    6．The fiber counts from 4-288 fibers.

  • Cáp ADSS hai lớp

    Cáp ADSS hai lớp

    Double Layer Aerial ADSS Cable is used  for communication cable of overhead high-voltage electricity
    transmission system,it also can be used as communication cable at the areas where lighting is frequent
    or distance is big. Aramid yarn is used as the strength member to assure the tensile and strain Performance.
    Mainly installed at existing 220kV or lower voltage power lines . Two Jacket and stranded loose tube design 

  • FTTH Tự hỗ trợ cáp loại thép xoắn

    FTTH Tự hỗ trợ cáp loại thép xoắn

    Description
    The typical self-supporting bow-type drop fiber optic cable consists of GJXFH/GJXH cable,
    and an additional strength member (steel wire or 0.33mm*7 stranded steel wire).

    Application                                        
    1. High performance optical network operating;
    2. High speed optical routes in buildings (FTTX);
    All types of fiber cables with different structures.

    Temperature Range:
    Operating :-20℃ to 60℃
    Storage :-20℃ to 60℃
  • Cáp thả sợi FTTH 2 lõi ngoài trời

    Cáp thả sợi FTTH 2 lõi ngoài trời

    GJYXCH Bow Type Drop Cable Structure: optical fiber(s) is placed between two steel wire strength members, with self-supporting steel wire strength component, low smoke, non-halogen flame retardant outer sheath material.we supply 1 core fiber optic cable / multi core fiber optic cable.

  • Cáp thả trong nhà FTTH

    Cáp thả trong nhà FTTH

    Description
    The typical bow-type drop optical cable includes central optical fibers 
    with 2 parallel KFRP or steel wire as the strength members placed on both sides,
    a LSZH or PVC sheath is extruded outside.
    Application                                        
    1. All types of fiber cables with different structures
    2. High performance optical network operating
    3. High speed optical routes in buildings (FTTX)
    Temperature Range:
    Operating :-20℃ to 60℃
    Storage :-20℃ to 60℃

Hotline: 0919.900.247