Trang chủ / Sản phẩm /

USB to RS-485 Interface Converter with RJ-45 port

The AN-USB-RS485-RJ45 module is a cost-effective way to convert RS485 industrial buses to a USB interface.


The AN-USB-RS485-RJ45 module is a cost-effective way to convert RS485 industrial buses to a USB interface. When connected to a PC USB port the AN-USB-RS485-RJ45 module is automatically detected and is installed as a native COM port which is compatible with any existing serial communication application. Multiple modules can be installed when using USB hubs thus allowing a hassle free configuration of a multi serial system without any IRQ or DMA configuration.


   The AN-USB-RS485-RJ45 converter can be configured for RS485  two-wire (Half Duplex) networks. When operating in two-wire RS485 the data transfer control is automatically done by the converter. Two independent and RS485 networks can be supported by one AN-USB-RS485-RJ45 module thus duplicating possible number of remote devices.

  • Computer interface: USB V1.1 2.0 Plug and Play.
  • Operational system virtual serial port driver.
  • Supports Windows 98/ME/XP/2000/CE, MAC & Linux 2.4.20 or superior.
  • Field Interfaces: RS-485 Half Duplex (dual buses),
  • Automatic flow control for RS485 Half Duplex.
  • Transmission rate: from 300 bps to 1Mbps.
  • Maximum RS-485 cable length : 1200 m
  • Maximum number of devices in the RS485 network: Half Duplex to 32 devices
  • Power: from the USB port.
  • Consumption:
  • RS-485 bus protection: 600W.
  • USB connection: Mini-B connector.150mm cable
  • with the module.
  • RS-485 connector: RJ-45 type accepting
  • ABS enclosure: 67 x 30 x 24 mm(not include cable)
  • Operating environment: 0 to 70°C, 10 to 90% relative humidity, non-condensing.

The RS-485 termination of the Interface is implemented as RJ-45 plug. The pin assignments for the connector can be found in the following table as well as on a sticker applied to the unit.

RS-485 Pinout at RJ-45

PIN#

RS-485

1

485+

2

485-

Wiring examples

Product Description

The AN-USB-RS485-RJ45 module is a cost-effective way to convert RS485 industrial buses to a USB interface. When connected to a PC USB port the AN-USB-RS485-RJ45 module is automatically detected and is installed as a native COM port which is compatible with any existing serial communication application. Multiple modules can be installed when using USB hubs thus allowing a hassle free configuration of a multi serial system without any IRQ or DMA configuration. They have 600W protect between the USB port and RS485 protects the PC from spikes or possible misconnections in the communication bus.

Sản phẩm khác

  • USB – RS-232 converter

    USB – RS-232 converter

    AN-USB-RS232 provides a simple and easy way to connect Universal Serial Bus (USB) and RS-232 Serial port interface.

  • USB to TTL converter

    USB to TTL converter

    The AN-USB-TTL module is a cost-effective way to convert TTL signal a USB interface

  • USB to RS-422 converter

    USB to RS-422 converter

    USB to RS-422 serial interface converter offers hassle free, plug and play operation for converting RS-422 serial interface to USB

Hotline: 0919.900.247