Trang chủ / Sản phẩm /

MS-80M Pyranometer

Pyranometer with Modbus technology. EKO new generation digital ISO 9060:2018 Class A pyranometer has the lowest measurement uncertainty.


MS-80M is a "Spectrally flat" ISO 9060:2018 Class A pyranometer. The innovative patented design was inspired by the combination of latest technologies and state-of-the-art thermopile sensor, enabling a breakthrough in unprecedented low zero-offset behaviour and fast sensor response.

The compact sensor with single dome, based on a isolated thermopile detector and Quartz diffusor is immune to offsets and integrates all optional value added functions such as a ventilator, heater and different industrial interfaces. The heater and ventilator are recommended, particularly over areas impacted by dew, frost, snow, and dust.

The MS-80M is a MS-80 with built in MODBUS RTU 485 converter, which is compatible to the industrial output standards. Due to the ultra-low temperature dependency and exceptional non-linearity characteristics, the converter guarantees an optimal sensor performance, under any environmental conditions.  

The MS-80 pyranometers are manufactured in a consistent way followed by strict quality inspection and performance evaluation. For each sensor the directional response and temperature dependency are measured and validated through a measurement report that comes with the sensor. EKO provides a unique calibration compliant to the international standards defined by ISO/IEC17025/9847. 

The sensor has 5 years warranty, 5 years recommended re-calibration interval and no longer the requirement for the desiccant to be changed.


Specification
ISO 9060:2018 Class A
ISO 9060:1990 (Secondary Standard)
Sub-category "Spectrally flat" Compliant
Sub-category "Fast response" Not compliant
Output Digital (Modbus RTU)
Response time 95% < 1 Sec.
Zero off-set a) 200W/m² +/- 1 W/m²
Zero off-set b) 5K/hr +/- 1 W/m²
Complete zero off-set c) +/- 2 W/m²
Non-stability change/1 year -
Non-stability change/5 years +/- 0.5 %
Non-linearity at 1000W/m² +/- 0.2 %
Directional response at 1000W/m² +/- 10 W/m²
Spectral error +/- 0.13 %
Temperature response -10°C to 40°C +/- 0.5 %
Temperature response -20°C to 50°C +/- 0.5 %
Tilt response at 1000W/m² +/- 0.2 %
Operating temperature range -40 - 80 °C
Irradiance range 0 - 4000 W/m²
Wavelength range 285 - 3000 nm
Power supply 12 - 24 VDC
Power consumption 0.2 - 0.3 W
Ingress protection IP 67
Cable length 10 m
Additional signal processing errors +/- 1.5 W/m²
 Options  
Cable length 20 / 30 / 50 m
Ventilation unit MV-01
Albedo mounting kit MS-albedo Kit

Sản phẩm khác

  • MS-80 Pyranometer

    MS-80 Pyranometer

    EKO’s new generation ISO9060:2018 Class A (secondary standard) analog pyranometer, with fast response and spectrally flat performance characteristics.

  • MS-80A Pyranometer

    MS-80A Pyranometer

    Pyranometer with 4-20mA output. ISO 9060:2018 Class A new generation digital pyranometer with the lowest measurement uncertainty.

  • MS-802 Pyranometer

    MS-802 Pyranometer

    The MS-802 ISO9060:2018 Class A (Secondary Standard) Pyranometer is a reference sensor to measure global solar irradiance with high precision.

  • MS-60 Pyranometer

    MS-60 Pyranometer

    Spectrally flat ISO 9060:2018 Class B (First Class) pyranometer with analog output.

  • MS-60A Pyranometer

    MS-60A Pyranometer

    ISO 9060:2018 Class B (First Class) pyranometer digital with 4-20mA output.

  • MS-60M Pyranometer

    MS-60M Pyranometer

    ISO 9060:2018 Class B (First Class) pyranometer digital with MODBUS 485 RTU output.

  • MS-40 Pyranometer

    MS-40 Pyranometer

    The MS-40 Class C (Second class) pyranometer with analog output is most cost-effective for irradiance measurements accross the Solar spectrum.

  • MS-40A Pyranometer

    MS-40A Pyranometer

    MS-40 Class C (Second class) pyranometer (4-20mA output) is the most cost-effective solution for irradiance measurements accross the Solar spectrum.

  • MS-40M Pyranometer

    MS-40M Pyranometer

    MS-40M Class C (Second class) pyranometer (Modbus 485 RTU) is the most cost-effective solution for irradiance measured accross the Solar spectrum.

Hotline: 0919.900.247