Trang chủ / Sản phẩm /

Modem G.SHDSL Loop-H3300

The Loop-H3300-3S is an addition to our H3300 family of CPE products that are based on the G.SHDSL transmission standard. They use the standard 16/32-TCPAM line format over



  • 1-pair/2-pair/1+1 G.SHDSL mode selectable
  • 1 pair G.SHDSL.bis
  • Dying Gasp report function on 2-pair G.SHDSL Mode (manufacturing option)
  • STU-C (master) or STU-R (slave) mode selectable
  • E1 (120 ohm) / T1 software configurable
  • Support router or bridge mode
  • Built in self-test, loopback and QRSS functions interface hybrid co-existence in one chassis
  • Local/remote management through console port, LAN, or WAN
  • Log-in and password security protection
  • VT100 Firmware Download
  • Support configuration upload/download
  • SNMP and Telnet are supported
  • Multi-color LED indicators
  • Optional front panel keys and 2-line by 16-character LCD display
  • Standard compliance:
    • G.SHDSL: ITU-T G.991.2 Annex A, B
    • G.SHDSL.bis: ITU-T G.991.2 Annex F
The Loop-H3300-3S is an addition to the H3300 family of CPE products that are based on the G.SHDSL transmission standard. They use the standard 16/32-TCPAM line format over twisted copper pairs to provide digital transport for a variety of data formats and data rates.
 
The distances this technology can span without repeaters are dependent on the data rate. The Loop-H 3300-3S provides high speed transport for a T1/E1 link plus an additional Ethernet bridge, V.35 data transport over one (1) or two (2) twisted copper pairs.
 
The H3300-3S works as a pair (as a master and a slave) or as a slave unit to the either one of the two master units: AM3440’s G.SHDSL card, H3300 rack and H3300-3S standalone.
 
The H3300-3S can be configured as a master or a slave, or as a slave side of the G.SHDSL link with the other master being the AM3440’s G.SHDSL card, H3300 rack card, or H3300-3S standalone unit. The master unit is usually located in central offices as a rack-mounted model. The slave unit is usually located at customer's premises and is a stand-alone model.

Sản phẩm khác

  • Loop-IP6700 TDMoEthernet

    Loop-IP6700 TDMoEthernet

    Loop-IP6700 TDMoEthernet is used to transport TDM traffic over IP network, in addition to Ethernet traffic. As the core communications network migrates from TDM to IP, the

  • IP6704A TDMoEthernet

    IP6704A TDMoEthernet

    The Loop-IP6704A device allows operators to transport E1 ,T1*, E&M, X.21, or RS232 data stream with timing information over PSN (Packet Switched Network) via Pseudowire Protocol – SAToP/CESoPSN/MEF8*.

  • V4300 Mini DACS E1/T1 Converter

    V4300 Mini DACS E1/T1 Converter

    The Loop-V4300 Mini DACS E1/T1 converter provides both DS0 and n x 64 Kbps cross-connect between any T1 and E1 ports and E1 to T1 format conversion functions.

Hotline: 0919.900.247