Trang chủ / Sản phẩm /

GYTC8S cáp quang ngoài trời

GYTC8S fiber optic cable, single-mode/multimode fibers are positioned in the loose tubes, while the loose tubes strand together
around metallic central strength member into a compact and circular cable core, and the water-blocking materials are distributed
into interstices of it. After a PSP/APL is applied around the cable core, this part of cable accompanied with the stranded wires as
the supporting part are completed with a PE sheath to be a figure-8 structure. 


Features:
1. Cable section is “8”,with 7*1.2mm steel wires;
2. PSP corrugated steel tape;
3. Steel wire strength member;
4. PBT loose tube,each tube max 12 fibers.

Applications:
Easy aerial installation,because of fig8 self supporting design,with simple and easy installation tools & accessories.

Advantages:
1. Self supporting,easy installation,save construction and labor cost;
2. Waterproof tape,gel compound,the fiber section all waterproof;
3. Steel tape armored with good crush resistance performance,also anti-rodent;
4. We can OEM produced double armored double jacket,single armored double jacket GYTC8S as customer requirements.


Parameter: 

    G.652D 50/125μm 62.5/125μm
Attenuation @850nm   ≤3.0 dB/km ≤3.0 dB/km
(+20℃) @1300nm   ≤1.0 dB/km ≤1.0 dB/km
  @1310nm ≤0.36 dB/km    
  @1550nm ≤0.22 dB/km    
Bandwidth (Class A) @850nm   ≥500 MHz·km ≥200 MHz·km
  @1300nm   ≥1000 MHz·km ≥600 MHz·km
Numerical Aperture     0.200±0.015NA 0.275±0.015NA
Cable Cut-off Wavelengthλcc   ≤1260nm    

Sản phẩm khác

  • Cáp chôn trực tiếp bọc thép (GYTA53)

    Cáp chôn trực tiếp bọc thép (GYTA53)

    1.Excellent mechanical and temperature.
    2.Critical protection to fibers.
    3.The following measures are taken to ensure the  water blocking performance of the cable:
    - Single steel wire used as the central strength Member                               
    - Special water-blocking filling compound in the loose tube
    - 100% cable core filling
    - APL and PSP moisture barrier

  • Cáp quang bọc thép đôi GYXTW53

    Cáp quang bọc thép đôi GYXTW53

    Features:

    Fiber count: 2 to 24

    Low loss, low dispersion, superior optical transmission attributeProper design and precise excess length.

    control offer excellent mechanical and environment properties to cable.

    Double steel tape armor enhances the cable's side pressure resistance and rodent-proof propert.

    Application:

    Adopted to Outdoor distribution.

    Suitable for aerial duct and buried method.

    Long distance and local area network communication.

  • GYXTW-12B1 12 lõi cáp quang bọc thép Uni-tube

    GYXTW-12B1 12 lõi cáp quang bọc thép Uni-tube

    1. Excellent mechanical and temperature performance guaranteed by the accurate excess fiber length.
    2. Critical protection to fibers, based on the excellent hydrolysis resistance
    3. Excellent crush resistance and flexibility.
    4. PSP enhances the cable crush-resistance, impact-resistance and moisture-proof.
    5. Two parallel steel wires ensure tensile strength.
    6. Excellent ultraviolet prevention with PE sheath,small diameter, light weight and installation friendliness

  • Cáp quang sợi quang bọc thép UniXTW 4 lõi

    Cáp quang sợi quang bọc thép UniXTW 4 lõi

    1. Excellent mechanical and temperature performance guaranteed by the accurate excess fiber length.
    2. Critical protection to fibers, based on the excellent hydrolysis resistance
    3. Excellent crush resistance and flexibility.
    4. PSP enhances the cable crush-resistance, impact-resistance and moisture-proof.
    5. Two parallel steel wires ensure tensile strength.
    6. Excellent ultraviolet prevention with PE sheath,small diameter, light weight and installation friendliness

  • Cáp quang sợi quang bọc thép UniXTW 6 lõi

    Cáp quang sợi quang bọc thép UniXTW 6 lõi

    Characteristics
    1. Excellent mechanical and temperature performance guaranteed by the accurate excess fiber length.
    2. Critical protection to fibers, based on the excellent hydrolysis resistance
    3. Excellent crush resistance and flexibility.
    4. PSP enhances the cable crush-resistance, impact-resistance and moisture-proof.
    5. Two parallel steel wires ensure tensile strength.
    6. Excellent ultraviolet prevention with PE sheath,small diameter, light weight and installation friendliness

  • Cáp quang GYXTC8S-12F 12 lõi bằng thép

    Cáp quang GYXTC8S-12F 12 lõi bằng thép

    12 Core Fiber Optic Cable with 8.3mm diameter ,HDPE osheathing, 
    Armored with corrogated steel tape,Armored under PE sheath,
    Water blocking tape between steel tape and cable core, 
    cable core is filled with jell for waterproofing,
    Messenger Wire:messenger wire outer diameter with 5.0mm 
    HDPE outer sheathing With 1.0X7=3.0mm phosphatized steel messenger wire for long lasting construction.
  • Cáp quang sợi quang bọc thép UniXTW-8B1 8 lõi

    Cáp quang sợi quang bọc thép UniXTW-8B1 8 lõi

    1. Excellent mechanical and temperature performance guaranteed by the accurate excess fiber length.
    2. Critical protection to fibers, based on the excellent hydrolysis resistance
    3. Excellent crush resistance and flexibility.
    4. PSP enhances the cable crush-resistance, impact-resistance and moisture-proof.
    5. Two parallel steel wires ensure tensile strength.
    6. Excellent ultraviolet prevention with PE sheath,small diameter, light weight and installation friendliness

  • Cáp quang ngoài trời 288 lõi GYTS

    Cáp quang ngoài trời 288 lõi GYTS

    GYTS is the outdoor fiber optic cable type used for duct and aerial applications. We supply single mode GYTS fiber optical cable and multimode GYTS fiber optic cable. multi mode / single mode armored fiber cable GYTS, 2~288 fibers central strength member (steel), jelly filled, fiber contained loose tube and PP filler (if necessary) stranded, water blocking jelly, longitudinally covered by copolymer steel tape, PE outer sheath. G652D SM fiber, detailed specification on your request.

  • Cáp Figure 8 với băng thép (GYXTC8S)

    Cáp Figure 8 với băng thép (GYXTC8S)

    In the GYXTC8S cable, single-mode/multimode fibers are positioned in the loose tube, which is made of high modulus plastic materials and filled with filling compound. PSP is longitudinally applied around the loose tube, and water-blocking materials are distributed into interstices of it. Then. this part of cable accompanied with the stranded wires as the supporting part are completed with a PE sheath to be a figure-8 structure

  • Cáp Fingure 8 với băng thép (GYXTC8S)

    Cáp Fingure 8 với băng thép (GYXTC8S)

    In the GYXTC8S cable, single-mode/multimode fibers are positioned in the loose tube, which is made of high modulus plastic materials and filled with filling compound. PSP is longitudinally applied around the loose tube, and water-blocking materials are distributed into interstices of it. Then. this part of cable accompanied with the stranded wires as the supporting part are completed with a PE sheath to be a figure-8 structure

Hotline: 0919.900.247