Trang chủ / Sản phẩm /

Dây nối đất quang trung tâm (OPGW)

The Central Tube Optical Ground Wire(OPGW) is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires. are the most widely used cables ,their design is full adapted to the most common electric line needs.


1. High quality standards for designing, testing and producing with grade A materials available to ensure
long-term reliability .
2. Engineering support supervising and providing its own line of accessories hardware .
3.Seal stainless steel tube superior protection to the fiber optical  to moisture and extreme environmental
conditions such as lightening
4. To construct OPGW must cut power, resulting in greater loss, thus OPGW must be used in constructing
high pressure line over 110kv;
5. Apply to the transformation of old lines.


Typical design for Single Layer OPGW Cable:

Specification Fiber Count

Diameter

(mm)

Weight
 (kg/km)
RTS
 (KN)
    Short Circuit 
   (KA2s)
OPGW-42(54.0;8.4) 24 9 313 54 8.4
OPGW-42(43.5;10.6) 24 9 284 43.5 10.6
OPGW-54(55.9;17.5) 36 10.2 394 67.8 13.9
OPGW-61(73.7;175) 48 10.8 438 73.7 17.5
OPGW-61(55.1;24.5) 48 10.8 358 55.1 24.5
OPGW-68(80.8;21.7) 54 11.4 485 80.8 21.7
OPGW-75(54.5;41.7) 60 12 459 63 36.3
OPGW-76(54.5;41.7) 60 12 385 54.5 41.7

Typical design for Double Layer OPGW Cable:

Specification Fiber Count Diameter
(mm)
Weight 
(kg/km)
RTS
(KN)
 Short Circuit 
(KA2s)
OPGW-127[141.0;87.9] 24 15 825 141 87.9
OPGW-127[77.8;128.0] 24 15 547 77.8 128
OPGW-145(121.0;132.2) 28 16 857 121 132.2
OPGW-163(138.2;183.6) 36 17 910 138.2 186.3
OPGW-163(99.9;213.7) 36 17 694 99.9 213.7
OPGW-183(109.7;268.7) 48 18 775 109.7 268.7
OPGW-183(118.4;261.6) 48 18 895 118.4 261.6

 
Standards:

ITU-TG.652 Characteristics of a single mode optical fiber
ITU-TG.655 Characteristics of a non-zero dispersion -shifted single mode fibers optical
EIA/TIA598 B Col code of fiber optic cables
IEC 60794-4-10 Aerial optical cables along electrical power lines-family specification for OPGW
IEC 60794-1-2 Optical fiber cables -part test procedures
IEEE1138-2009 IEEE Standard for testing and performance for optical ground wire for use on electric utility power lines
 
IEC 61232 Aluminum -Clad steel wire for electrical purposes
IEC60104 Aluminum magnesium silicon alloy wire for overhead line conductors
IEC 61089 Round wire concentric lay overhead electrical stranded conductors .

Sản phẩm khác

  • Dây nối đất quang (OPGW)

    Dây nối đất quang (OPGW)

    The Stranded Optical Ground Wire (OPGW) is stranded by double or three layers of aluminum clad steel wires(ACS)
    or mix ACS wires and aluminum alloy wires,its design is fully adapted to the most common electric line needs.

  • Dây nối đất ống lỏng PBT (Cáp OPGW)

    Dây nối đất ống lỏng PBT (Cáp OPGW)

    The PBT Loose Tube Optical Ground Wire (OPGW) is surrounded by single or 
    double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum 
    alloy wires. Good anti-corrosion performance.Material and structure are uniform, good
    resistance to vibration fatigue.

Hotline: 0919.900.247