Loop-IP6700 TDMoEthernet
Loop-IP6700 TDMoEthernet is used to transport TDM traffic over IP network, in addition to Ethernet traffic. As the core communications network migrates from TDM to IP, the
- ANSI shelf
- Power Module: Single AC or DC power
- 1 Electric Ethernet (10/100 BaseT) port or 1 Optical Ethernet (100 BaseFX) port
-
TDM Tributary interface:
-
- Up to 4 E1/T1
-
- Up to 2 serial: V.35 or EIA530 or X.21 or V.36/RS449 or RS422 / V.11
-
- 1 E3/DS3
-
-
Ethernet tributary interface:
- 1x 10/100 BaseT Ethernet port plus 1 user-selectable 10/100 BaseT Ethernet/SNMP port
-
Jumbo frame size up to 1916 bytes
-
IS-IS Packet transparency
-
VLAN
- Maximum 4K VLAN ID
- Maximum 16 con-current VLAN Groups
- Supports C-VLAN/S-VLAN tag adding and removing on Pseudowire
- Supports 802.1q Port-Based VLAN on Ethernet/SNMP Port
-
Supports 802.1d MAC Learning
-
Supports 803.3x Flow control on input ports
- Ingress Rate Limiting per Ethernet port with 32Kbps granularity
-
IP Network Level: - 6-bit DiffServ Code Point -DSCP field – ToS
- Supports TDMoIP-AAL1, SAToP, CESoPSN, and MEF-8
- Supports E1/T1 traffic emulation over UDP/IP and Ethernet network
- Supports Timeslot Grooming
- Maximum 64 pseudowires
- PDV Compensation Depth:
- E1: up to 256ms
- T1: up to 340ms
- Jitter Buffer size: 1 ms to 512 ms
- Minimum packetization latency < 1 ms
- Excel calculator is provided
- Built-in BERT for E1/T1 to Line or WAN direction
- ARP, Ping and Trace Route
- IP – MAC Table Display
- Pseudowire Information
- Packet Creation Time (ms)
- Jitter-Tolerance Delay (ms)
- Single-Trip Delay (ms)
- Total Frame Length (bytes)
- Packet per second
- Required Bandwidth (Mbps)
- Header Overhead (%)
- PPM version: Conforms to G.823/G.824 Traffic Interface
- PPB version: Conforms to G.823/G.824 Synchronous Interface
- Internal
- External: BNC connector
- Line (E1/T1)
- Adaptive Clock Recovery: All Pseudowires can apply ACR
- Supports 2 SNTP Timing References
- Multi-color LED indicators
- Alarm relay
- ACO (Alarm Cutoff) button
- 1 user-selectable Ethernet/SNMP port
- SNMPv1/v3
- LCD and keypad
- DB-9 Console port with VT100 menu
- Telnet and SSHv1/SSHv2
- C-VLAN/S-VLAN tag on management traffic
- LoopView GUI
- Inband management: through one time slot (64Kbps)
- TDMoIP, SAToP, CESoPSN, MEF-8
- ANSI shelf
- Power Module: Single AC or DC power
- 1 Electric Ethernet (10/100 BaseT) port or 1 Optical Ethernet (100 BaseFX) port
-
TDM Tributary interface:
-
- Up to 4 E1/T1
-
- Up to 2 serial: V.35 or EIA530 or X.21 or V.36/RS449 or RS422 / V.11
-
- 1 E3/DS3
-
-
Ethernet tributary interface:
- 1x 10/100 BaseT Ethernet port plus 1 user-selectable 10/100 BaseT Ethernet/SNMP port
-
Jumbo frame size up to 1916 bytes
-
IS-IS Packet transparency
-
VLAN
- Maximum 4K VLAN ID
- Maximum 16 con-current VLAN Groups
- Supports C-VLAN/S-VLAN tag adding and removing on Pseudowire
- Supports 802.1q Port-Based VLAN on Ethernet/SNMP Port
-
Supports 802.1d MAC Learning
-
Supports 803.3x Flow control on input ports
- Ingress Rate Limiting per Ethernet port with 32Kbps granularity
-
IP Network Level: - 6-bit DiffServ Code Point -DSCP field – ToS
- Supports TDMoIP-AAL1, SAToP, CESoPSN, and MEF-8
- Supports E1/T1 traffic emulation over UDP/IP and Ethernet network
- Supports Timeslot Grooming
- Maximum 64 pseudowires
- PDV Compensation Depth:
- E1: up to 256ms
- T1: up to 340ms
- Jitter Buffer size: 1 ms to 512 ms
- Minimum packetization latency < 1 ms
- Excel calculator is provided
- Built-in BERT for E1/T1 to Line or WAN direction
- ARP, Ping and Trace Route
- IP – MAC Table Display
- Pseudowire Information
- Packet Creation Time (ms)
- Jitter-Tolerance Delay (ms)
- Single-Trip Delay (ms)
- Total Frame Length (bytes)
- Packet per second
- Required Bandwidth (Mbps)
- Header Overhead (%)
- PPM version: Conforms to G.823/G.824 Traffic Interface
- PPB version: Conforms to G.823/G.824 Synchronous Interface
- Internal
- External: BNC connector
- Line (E1/T1)
- Adaptive Clock Recovery: All Pseudowires can apply ACR
- Supports 2 SNTP Timing References
- Multi-color LED indicators
- Alarm relay
- ACO (Alarm Cutoff) button
- 1 user-selectable Ethernet/SNMP port
- SNMPv1/v3
- LCD and keypad
- DB-9 Console port with VT100 menu
- Telnet and SSHv1/SSHv2
- C-VLAN/S-VLAN tag on management traffic
- LoopView GUI
- Inband management: through one time slot (64Kbps)
- TDMoIP, SAToP, CESoPSN, MEF-8
Sản phẩm khác
-
IP6704A TDMoEthernet
The Loop-IP6704A device allows operators to transport E1 ,T1*, E&M, X.21, or RS232 data stream with timing information over PSN (Packet Switched Network) via Pseudowire Protocol – SAToP/CESoPSN/MEF8*.
-
Loop-IP6510 Multiple WAN Router/Bridge
The Loop-IP6763 transports E1/T1 plus STM-1 signals over an IP network.
-
Modem G.SHDSL Loop-H3300
The Loop-H3300-3S is an addition to our H3300 family of CPE products that are based on the G.SHDSL transmission standard. They use the standard 16/32-TCPAM line format over
-
V4300 Mini DACS E1/T1 Converter
The Loop-V4300 Mini DACS E1/T1 converter provides both DS0 and n x 64 Kbps cross-connect between any T1 and E1 ports and E1 to T1 format conversion functions.