NMOC Optical Cable

Single Layer Aerial ADSS Cable is idea for installation in distribution as well as transmission
envirline installations are required as its name indicates, there is no support or messenger wire
required, so installation is achieved in a single pass.

The ADSS consits jelly-filled loose tubes, laid up around a central nonmetallic strength member.
The cable is water blocked, aramid yarn reinforced and PE or AT sheathed. ADSS (All Dielectric Self-Supporting) Cable is suspended from poles or towers in telecommunication and power outside plant applications.

Long Span ADSS provides reliable self-support performance for up to 1600 meters. Each Long Span ADSS cable is custom engineered for optimum placement on utility towers and to operate under full weather load, ensuring safe reliable lifetime performance. For installation on high-voltage lines up to 275 KV, an optional track-resistant jacket prevents dry-band arcing damage. Fiber counts is available up to 288 fibers. 

1．Suitable for use on distribution and high voltage transmission   lines with mini spans or self supporting installation for telecommunication ;
2．Track -Resistant outer jacket available for the high voltage;
3．Line where space potentials up to 35kv;
4．Gel-Filled buffer tubes are S-Z stranded;
5．Instead of Aramid yarn or glass yarn,there is no support or messenger wire required. Aramid yarn is used as the strength member to assure the tensile and strain performance for mini span (usually below 100 meters) ;
6．The fiber counts from 4-288 fibers.

1．Suitable for use on distribution and high voltage transmission   lines with mini spans or self supporting installation for telecommunication ;
2．Track -Resistant outer jacket available for the high voltage;
3．Line where space potentials up to 35kv;
4．Gel-Filled buffer tubes are S-Z stranded;
5．Instead of Aramid yarn or glass yarn,there is no support or messenger wire required. Aramid yarn is used as the strength member to assure the tensile and strain performance for mini span (usually below 100 meters) ;
6．The fiber counts from 4-288 fibers.

Double Layer Aerial ADSS Cable is used  for communication cable of overhead high-voltage electricity
transmission system,it also can be used as communication cable at the areas where lighting is frequent
or distance is big. Aramid yarn is used as the strength member to assure the tensile and strain Performance.
Mainly installed at existing 220kV or lower voltage power lines . Two Jacket and stranded loose tube design 

GJYXCH Bow Type Drop Cable Structure: optical fiber(s) is placed between two steel wire strength members, with self-supporting steel wire strength component, low smoke, non-halogen flame retardant outer sheath material.we supply 1 core fiber optic cable / multi core fiber optic cable.

1.Excellent mechanical and temperature.
2.Critical protection to fibers.
3.The following measures are taken to ensure the  water blocking performance of the cable:
- Single steel wire used as the central strength Member                               
- Special water-blocking filling compound in the loose tube
- 100% cable core filling
- APL and PSP moisture barrier

Features:

Fiber count: 2 to 24

Low loss, low dispersion, superior optical transmission attributeProper design and precise excess length.

control offer excellent mechanical and environment properties to cable.

Double steel tape armor enhances the cable's side pressure resistance and rodent-proof propert.

Application:

Adopted to Outdoor distribution.

Suitable for aerial duct and buried method.

Long distance and local area network communication.

1. Excellent mechanical and temperature performance guaranteed by the accurate excess fiber length.
2. Critical protection to fibers, based on the excellent hydrolysis resistance
3. Excellent crush resistance and flexibility.
4. PSP enhances the cable crush-resistance, impact-resistance and moisture-proof.
5. Two parallel steel wires ensure tensile strength.
6. Excellent ultraviolet prevention with PE sheath，small diameter, light weight and installation friendliness

1. Excellent mechanical and temperature performance guaranteed by the accurate excess fiber length.
2. Critical protection to fibers, based on the excellent hydrolysis resistance
3. Excellent crush resistance and flexibility.
4. PSP enhances the cable crush-resistance, impact-resistance and moisture-proof.
5. Two parallel steel wires ensure tensile strength.
6. Excellent ultraviolet prevention with PE sheath，small diameter, light weight and installation friendliness

Characteristics
1. Excellent mechanical and temperature performance guaranteed by the accurate excess fiber length.
2. Critical protection to fibers, based on the excellent hydrolysis resistance
3. Excellent crush resistance and flexibility.
4. PSP enhances the cable crush-resistance, impact-resistance and moisture-proof.
5. Two parallel steel wires ensure tensile strength.
6. Excellent ultraviolet prevention with PE sheath，small diameter, light weight and installation friendliness

According to IEEE std 1138,IEC 60794-4 standards

1. Excellent mechanical and temperature performance guaranteed by the accurate excess fiber length.
2. Critical protection to fibers, based on the excellent hydrolysis resistance
3. Excellent crush resistance and flexibility.
4. PSP enhances the cable crush-resistance, impact-resistance and moisture-proof.
5. Two parallel steel wires ensure tensile strength.
6. Excellent ultraviolet prevention with PE sheath，small diameter, light weight and installation friendliness

GYTS is the outdoor fiber optic cable type used for duct and aerial applications. We supply single mode GYTS fiber optical cable and multimode GYTS fiber optic cable. multi mode / single mode armored fiber cable GYTS, 2~288 fibers central strength member (steel), jelly filled, fiber contained loose tube and PP filler (if necessary) stranded, water blocking jelly, longitudinally covered by copolymer steel tape, PE outer sheath. G652D SM fiber, detailed specification on your request.