ADSS nhịp dài 600-1600m
Long Span ADSS provides reliable self-support performance for up to 1600 meters. Each Long Span ADSS cable is custom engineered for optimum placement on utility towers and to operate under full weather load, ensuring safe reliable lifetime performance. For installation on high-voltage lines up to 275 KV, an optional track-resistant jacket prevents dry-band arcing damage. Fiber counts is available up to 288 fibers.
Reliable Lifetime Performance
1.Exclusive fiber coating (single mode) for permanent embedded color & 2.Custom engineered for operation under full load
3. Optional track-resistant jacket prevents dry-band arcing damage for line voltages 275 kV ( 20kV space potential)
4.Guaranteed standards-based performance
Easy Cable Entry & Preparation
1.Ripcord speeds cable entry & outer jacket removal
2.Swellable binders speed cable preparation
According to IEEE 1222, IEC 60794-4-20, ANSI/ICEA S-87-640, TELCORDIA GR-20, IEC 60793-1-22, IEC 60794-1-2, IEC 60794 standards
Proven Long Span Installation & Use
1.Tailored designs span distances up to 2,500’ (760 m) without interrupting power
2.Higher count designs utilize 24 fiber per tube to reduce environmental load
3.Matching pole attachment hardware (dead-ends, suspension clamps)
Technical Parameter:
Span (meter) | Weight(kg/km) | Diameter(mm) | Initial Tension (N) Unload Load |
|
12 fibers per tube | ||||
600 | 162 | 13.60 | 17500 | 17852 |
700 | 173 | 13.90 | 21600 | 22200 |
800 | 178 | 14.20 | 24200 | 24320 |
900 | 184 | 14.50 | 36200 | 36800 |
1000 | 189 | 14.80 | 42700 | 42950 |
1100 | 195 | 15.10 | 47300 | 47600 |
1200 | 201 | 15.40 | 52600 | 52960 |
1300 | 207 | 15.70 | 57200 | 57600 |
1400 | 212 | 16.00 | 62500 | 62800 |
1500 | 217 | 16.30 | 66300 | 66650 |
1600 | 223 | 16.60 | 68900 | 69263 |
Other
-
ADSS: All Dielectric Fiber Optic Cable 2-288 Cores
Single Layer Aerial ADSS Cable is idea for installation in distribution as well as transmission
envirline installations are required as its name indicates, there is no support or messenger wire
required, so installation is achieved in a single pass.
-
Cáp ADSS có độ căng 10 đến 30KN
The ADSS consits jelly-filled loose tubes, laid up around a central nonmetallic strength member.
The cable is water blocked, aramid yarn reinforced and PE or AT sheathed. ADSS (All Dielectric Self-Supporting) Cable is suspended from poles or towers in telecommunication and power outside plant applications.
-
Cáp ADSS tự hỗ trợ toàn bộ cho khoảng cách 50-150M
Product Name: ADSS Self-Supporting Aerial Fiber CableBrand Place of Origin: GL Hunan,China (Mainland)Application: Self-Supporting , Aerial , OutdoorSupporting Strength: Aramid Yarn/KevlarSpan: 50-150 Meter(For Mini Span)Central Strength Member: FRP
-
Cáp ADSS khoảng cách ngắn
1.Suitable for use on distribution and high voltage transmission lines with mini spans or self supporting installation for telecommunication ;
2.Track -Resistant outer jacket available for the high voltage;
3.Line where space potentials up to 35kv;
4.Gel-Filled buffer tubes are S-Z stranded;
5.Instead of Aramid yarn or glass yarn,there is no support or messenger wire required. Aramid yarn is used as the strength member to assure the tensile and strain performance for mini span (usually below 100 meters) ;
6.The fiber counts from 4-288 fibers.
-
Cáp ADSS tự hỗ trợ toàn bộ một lớp
1.Suitable for use on distribution and high voltage transmission lines with mini spans or self supporting installation for telecommunication ;
2.Track -Resistant outer jacket available for the high voltage;
3.Line where space potentials up to 35kv;
4.Gel-Filled buffer tubes are S-Z stranded;
5.Instead of Aramid yarn or glass yarn,there is no support or messenger wire required. Aramid yarn is used as the strength member to assure the tensile and strain performance for mini span (usually below 100 meters) ;
6.The fiber counts from 4-288 fibers.
-
Cáp ADSS hai lớp
Double Layer Aerial ADSS Cable is used for communication cable of overhead high-voltage electricity
transmission system,it also can be used as communication cable at the areas where lighting is frequent
or distance is big. Aramid yarn is used as the strength member to assure the tensile and strain Performance.
Mainly installed at existing 220kV or lower voltage power lines . Two Jacket and stranded loose tube design
-
FTTH Tự hỗ trợ cáp loại thép xoắn
DescriptionThe typical self-supporting bow-type drop fiber optic cable consists of GJXFH/GJXH cable,
and an additional strength member (steel wire or 0.33mm*7 stranded steel wire).
Application
1. High performance optical network operating;
2. High speed optical routes in buildings (FTTX);
All types of fiber cables with different structures.
Temperature Range:Operating :-20℃ to 60℃
Storage :-20℃ to 60℃
-
Cáp thả sợi FTTH 2 lõi ngoài trời
GJYXCH Bow Type Drop Cable Structure: optical fiber(s) is placed between two steel wire strength members, with self-supporting steel wire strength component, low smoke, non-halogen flame retardant outer sheath material.we supply 1 core fiber optic cable / multi core fiber optic cable.
-
Cáp thả trong nhà FTTH
DescriptionThe typical bow-type drop optical cable includes central optical fibers
with 2 parallel KFRP or steel wire as the strength members placed on both sides,
a LSZH or PVC sheath is extruded outside.
Application
1. All types of fiber cables with different structures
2. High performance optical network operating
3. High speed optical routes in buildings (FTTX)
Temperature Range:Operating :-20℃ to 60℃
Storage :-20℃ to 60℃