Telecommunications -IT
Industrial Communication
IP-PBX system
Energy Equipment
Extra Low Voltage
VHF-UHF System
GPS Module 8029NTS
Time Server 8029NTS for DIN Rail mounting – compact and highly flexible at the same time
On purchase you decide on
- which additional signal output modules (incl. physical signal output and plug-in connection) you optionally want to have integrated in your system:
- 1 independent NTP time server is integrated in your system by default
- you can specify on purchase if you need an extension slot to be equipped with an additional independent NTP time server or with the following optional signal output modules:
- IRIG-B (analogue / digital)
- DCF77 pulse
- cyclic pulses
- the external time synchronization source:
- GPS (immediately available)
- IRIG-B (on demand)
- which kind of power supply you require:
- 100-240V AC
- 110-250V DC
- 24V DC
- 48V DC
- which type of crystal to be integrated in the application:
- standard crystal
- VCTCXO crystal
The completely maintenance-free and highly-precise network time server for DIN Rail mounting is the ideal synchronization solution of networks and industrial applications.
- 1 independent NTP time server is integrated by default; on request your system can be equipped with 1 additional independent NTP time server or with the following signal output modules
- IRIG-B (analogue / digital)
- DCF77 pulse
- cyclic pulses
- simple, complete and safe operation and parameterisation (password protection and activatable https protocol) via a password-protected WebGUI (optional SSH/Telnet)
- current status bar easily available via WebGUI
- important information for implementing and about operating status available via status-LEDs at the front panel (if WebGUI-access is not available)
- improved security ensured by
- symmetric keys
- access restriction
- autokey
- deactivation of non-used network protocols
- SyncOFF Timer (reception failure bypassing) for accurate operation even based on difficult reception conditions
- synchronization status output via optical coupler
- GPS antenna circuit with potential isolation and antenna circuit control (supervision if antenna input is open or short-circuited)
- By GPS time synchronization and the worldwide used time protocol NTP the time server 8029NTS turns into a highly accurate NTP Stratum 1 time server
- synchronization of IEC 61850 compatible devices via NTP/SNTP
- closed aluminium profile housing for easy and horizontal DIN Rail mounting according to DIN EN 60715 TH35
- automatic switch-over of summer/winter time
- high freewheel accuracy provided by GPS supported regulation of the internal quartz basis
- redundant multiple validation of the synchronization signal for an error-free and leap-free signal evaluation
- maintenance-free, buffered backup clock for at least three days
- automatic handling of the leap second
Other
VCL PTP IEEE-1588v2 Slave Clock for ToD and Frequency Synchronization
VCL-GPS IEEE-1588v2, NTP Server (IPv4 and IPv6), provides IRIG-B, 1PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits GPS referenced clock outputs.
Redundant GPS, Primary Reference Clock with IEEE-1588v2 PTP and NTP
VCL-2145 is a high-performance GPS Primary reference clock and IEEE-1588v2 PTP that provides ITU-T G.811 primary synchronization freferences which are locked to a user selected satellite source.
VCL-2145-LC, GPS Primary Reference Clock (PRC)
GPS Primary Reference Clock (PRC) provides 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits clock outputs with high stability OCXO Holdover Clock. Rubidium Clock option available.
Primary Reference Clock with IEEE-1588v2 PTP Grandmaster and NTP
VCL-GPS-2145 Master: Provides IRIG-B, 1PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits GPS referenced clock outputs.
Redundant GPS, Primary Reference Clock with IEEE-1588v2 PTP Grandmaster
VCL-GPS-2145-D Grandmaster: Provides IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits GPS referenced clock outputs.
VCL-2145-SLV, PTP IEEE-1588v2 Slave Clock
PTP Slave Clock for ToD and Frequency Synchronization - synchronizes to PTP Grandmaster to provide IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits clock outputs. OCXO and Rubidium Holdover Clock options available
VCL-2112-SLV-LC, PTP IEEE-1588v2 Slave Clock
PTP Slave Clock for ToD and Frequency Synchronization-synchronizes to PTP Grandmaster to provide IRIG-B, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits
NTP100-GPS
Stratum 1 NTP server locked to GPS satellites for legally traceable time-stamping.
NTP100-TC
NTP server synchronized to time code input with automatic time code source detection. Supports SMPTE (30/25/25 fps), Leitch Date Encoding Standard, IRIG-B pulse width coded (unmodulated) DC, IEEE 1344 standard, IRIG-B(1) 1 kHz Amplitude Modulated, IEEE 1344 standard
NTP100-OSC
Stand-alone NTP server with internal precision temperature controlled crystal oscillator.
GMR1000
The GMR1000 is high-precision, multi-function master clocks that can act as an NTP server, PTP grandmaster, time code generator or frequency reference.
GMR5000
The GMR5000 is high-precision, multi-function master clocks that can act as an NTP server, PTP grandmaster, time code generator or frequency reference.
GPS Module 6875 LAN
Module 6875 is a GPS Time Server in a compact aluminium housing for 35mm DIN rail mounting (DIN EN 60715 TH35).
GPS Module 8030NTS
Compact - space-saving - highly precise - maintenance free!
GPS Module 6870
Module 6870 is a GPS clock in a compact aluminium housing for 35mm DIN rail mounting (DIN EN 60715 TH35). The module is easily clipped onto the rail via a clip based on "snap-in" mechanism.