NTP100-TC
NTP server synchronized to time code input with automatic time code source detection. Supports SMPTE (30/25/25 fps), Leitch Date Encoding Standard, IRIG-B pulse width coded (unmodulated) DC, IEEE 1344 standard, IRIG-B(1) 1 kHz Amplitude Modulated, IEEE 1344 standard
The NTP100-TC is an NTP time server that synchronizes to a time code source and converts the signal to Network Time Protocol. It automatically detects the incoming time code source; long-term accuracy is the same as the external source. With loss of time code, the device will revert to an internal oscillator with accuracy of better than 165 msec/day.
- Converts time code to NTP
- NTP output accuracy of ± 2 ms
- Time stamp precision of 5-10 ms
- Time server synchronized to your existing IRIG or SMPTE time code source
- Automatically detects time code source
- SMPTE (30/25/25 fps), Leitch Date Encoding Standard
- IRIG-B pulse width coded (unmodulated) DC, IEEE 1344 standard
- IRIG-B(1) 1 kHz Amplitude Modulated, IEEE 1344 standard
- NTP query (Unicast), Multicast or Broadcast modes
- Assignable network configuration
- Configuration via Telnet/SSH or included WinDiscovery
- IPv4/IPv6 compatible
Holdover Accuracy
- With loss of power or reference, device reverts to an internal precision TCXO temperature-compensated crystal oscillator with accuracy of ± 1min/year or < 165ms per day
- High-stability option with OCXO provides typical stability of 1 ppb/day or ± 250ms/year
Rack Mount
- Optional RM4 rack mount kit available
Connectors
- RJ45 - 10/100MB Ethernet
- DC input - 2.1 mm male jack
- 3-pin terminal block (differential time code input)
- BNC (single-ended time code input)
- USB for configuration
Power Supply
- DC input (9-28 VDC)
- Power consumption:
- Includes an external 24 VDC wall mount power supply with locking DC plug, UL & CE listed. Supplied with your choice of US, Euro, British or AUS/NZ plug - others optionally available.
Network Compatibility
- NTP unicast, multicast, or broadcast mode
- Supports:
- NTP v2 (RFC 1119)
- NTP v3 (RFC 1306)
- NTP v4 (RFC 5905)
- DHCPv4, DHCPv6 for automatic acquisition of network address, name servers, and timeserver configuration
- Telnet/SSH communication
- IPv4/IPv6 compatible
- SNMP with custom MIB
Configuration
- Provides dynamic configuration for networking parameters
- Network discovery tool provides automatic discovery of NTP devices attached to network without changing PC’s networking configuration
- Configuration is saved to non-volatile memory and survives power losses
- Authenticated network messages prevent unauthorized tampering of clock configuration
Physical Size:
- 6.44 x 4.06 x 1.44 in (16.35 x 10.32 x 3.65 cm)
- 16 oz (453.6 g)
Case
- Cover: black aluminum
- Front/rear panel: clear anodized aluminum
Compliance
- CE Marked – Available for sale in EU
- FCC, Part 15, Class B, emissions
Other
-
VCL PTP IEEE-1588v2 Slave Clock for ToD and Frequency Synchronization
VCL-GPS IEEE-1588v2, NTP Server (IPv4 and IPv6), provides IRIG-B, 1PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits GPS referenced clock outputs.
-
Redundant GPS, Primary Reference Clock with IEEE-1588v2 PTP and NTP
VCL-2145 is a high-performance GPS Primary reference clock and IEEE-1588v2 PTP that provides ITU-T G.811 primary synchronization freferences which are locked to a user selected satellite source.
-
VCL-2145-LC, GPS Primary Reference Clock (PRC)
GPS Primary Reference Clock (PRC) provides 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits clock outputs with high stability OCXO Holdover Clock. Rubidium Clock option available.
-
Primary Reference Clock with IEEE-1588v2 PTP Grandmaster and NTP
VCL-GPS-2145 Master: Provides IRIG-B, 1PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits GPS referenced clock outputs.
-
Redundant GPS, Primary Reference Clock with IEEE-1588v2 PTP Grandmaster
VCL-GPS-2145-D Grandmaster: Provides IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits GPS referenced clock outputs.
-
VCL-2145-SLV, PTP IEEE-1588v2 Slave Clock
PTP Slave Clock for ToD and Frequency Synchronization - synchronizes to PTP Grandmaster to provide IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits clock outputs. OCXO and Rubidium Holdover Clock options available
-
VCL-2112-SLV-LC, PTP IEEE-1588v2 Slave Clock
PTP Slave Clock for ToD and Frequency Synchronization-synchronizes to PTP Grandmaster to provide IRIG-B, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits
-
NTP100-GPS
Stratum 1 NTP server locked to GPS satellites for legally traceable time-stamping.
-
NTP100-OSC
Stand-alone NTP server with internal precision temperature controlled crystal oscillator.
-
GMR1000
The GMR1000 is high-precision, multi-function master clocks that can act as an NTP server, PTP grandmaster, time code generator or frequency reference.
-
GMR5000
The GMR5000 is high-precision, multi-function master clocks that can act as an NTP server, PTP grandmaster, time code generator or frequency reference.
-
GPS Module 6875 LAN
Module 6875 is a GPS Time Server in a compact aluminium housing for 35mm DIN rail mounting (DIN EN 60715 TH35).
-
GPS Module 8029NTS
Time Server 8029NTS for DIN Rail mounting – compact and highly flexible at the same time
-
GPS Module 8030NTS
Compact - space-saving - highly precise - maintenance free!
-
GPS Module 6870
Module 6870 is a GPS clock in a compact aluminium housing for 35mm DIN rail mounting (DIN EN 60715 TH35). The module is easily clipped onto the rail via a clip based on "snap-in" mechanism.