NTP100-GPS
Stratum 1 NTP server locked to GPS satellites for legally traceable time-stamping.
The NTP100-GPS is an NTP (Network Time Protocol) server that synchronizes to GPS satellites and distributes NTP reference signals via Ethernet. When synchronized to the atomic clocks in GPS and GLONASS satellites, the long term accuracy of the device is the same as the atomic clock of the GNSS. An internal TCXO (temperature-compensated crystal oscillator) provides holdover stability of ± 1 min/year during GPS signals loss. An optional OCXO (oven-controlled crystal oscillator) increases holdover stability to ± 250ms/year.
- Provides time legally-traceable UTC
- NTP output accuracy of ± 2 ms
- Synchronized to atomic clocks in GPS satellites for Stratum 1 accuracy
- Typical holdover stability of ± 1 min/year using high precision internal TCXO during GPS loss
- High-stability option with OCXO provides typical stability of ± 250 ms/year
- Time stamp precision of 5-10 ms
- NTP query (unicast), multicast, or broadcast modes
- Assignable network configuration
- Configuration via Telnet/SSH or included WinDiscovery
- IPv4/IPv6 compatible
- MD5 authentication
Time Reference
When synchronized to atomic clocks in GPS satellites the long term accuracy of the NTP100 is the same as the atomic clock of the GPS
After initial synchronization and (if) upon loss of GPS signal the NTP100 will revert to an internal temperature compensated crystal oscillator and typically maintain accuracy of
Power Supply
DC input (9-28 VDC)
Power consumption: <7.5W
Includes an external 24 VDC wall-mount power supply with locking DC plug, UL & CE listed
Connectors
RJ45 ─ 10/100 MB
DC input ─ 2.1 mm male jack
Antenna ─ SMA
RS-232 – 9 pin male
USB – for configuration via WinDiscovery
Network Compatibility
NTP unicast, multicast, or broadcast mode
Supports:
- NTP v2 (RFC 1119)
- NTP v3 (RFC 1306)
- NTP v4 (RFC 5905)
DHCPv4, DHCPv6 for automatic acquisition of network address, name servers, and timeserver configuration
Telnet/SSH communication
IPv4/IPv6 compatible
SNMP with custom MIB
Rack Mount
Optional RM4 rack mount kit available
Physical Size
6.44 x 4.06 x 1.44 in (16.35 x 10.32 x 3.65 cm)
16 oz (453.6 g)
Case
Cover: black aluminum
Front/rear panel: clear anodized aluminum
Compliance
CE Marked – Available for sale in EU
FCC, Part 15, Class B, emissions
Other
-
VCL PTP IEEE-1588v2 Slave Clock for ToD and Frequency Synchronization
VCL-GPS IEEE-1588v2, NTP Server (IPv4 and IPv6), provides IRIG-B, 1PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits GPS referenced clock outputs.
-
Redundant GPS, Primary Reference Clock with IEEE-1588v2 PTP and NTP
VCL-2145 is a high-performance GPS Primary reference clock and IEEE-1588v2 PTP that provides ITU-T G.811 primary synchronization freferences which are locked to a user selected satellite source.
-
VCL-2145-LC, GPS Primary Reference Clock (PRC)
GPS Primary Reference Clock (PRC) provides 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits clock outputs with high stability OCXO Holdover Clock. Rubidium Clock option available.
-
Primary Reference Clock with IEEE-1588v2 PTP Grandmaster and NTP
VCL-GPS-2145 Master: Provides IRIG-B, 1PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits GPS referenced clock outputs.
-
Redundant GPS, Primary Reference Clock with IEEE-1588v2 PTP Grandmaster
VCL-GPS-2145-D Grandmaster: Provides IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits GPS referenced clock outputs.
-
VCL-2145-SLV, PTP IEEE-1588v2 Slave Clock
PTP Slave Clock for ToD and Frequency Synchronization - synchronizes to PTP Grandmaster to provide IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits clock outputs. OCXO and Rubidium Holdover Clock options available
-
VCL-2112-SLV-LC, PTP IEEE-1588v2 Slave Clock
PTP Slave Clock for ToD and Frequency Synchronization-synchronizes to PTP Grandmaster to provide IRIG-B, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits
-
NTP100-TC
NTP server synchronized to time code input with automatic time code source detection. Supports SMPTE (30/25/25 fps), Leitch Date Encoding Standard, IRIG-B pulse width coded (unmodulated) DC, IEEE 1344 standard, IRIG-B(1) 1 kHz Amplitude Modulated, IEEE 1344 standard
-
NTP100-OSC
Stand-alone NTP server with internal precision temperature controlled crystal oscillator.
-
GMR1000
The GMR1000 is high-precision, multi-function master clocks that can act as an NTP server, PTP grandmaster, time code generator or frequency reference.
-
GMR5000
The GMR5000 is high-precision, multi-function master clocks that can act as an NTP server, PTP grandmaster, time code generator or frequency reference.
-
GPS Module 6875 LAN
Module 6875 is a GPS Time Server in a compact aluminium housing for 35mm DIN rail mounting (DIN EN 60715 TH35).
-
GPS Module 8029NTS
Time Server 8029NTS for DIN Rail mounting – compact and highly flexible at the same time
-
GPS Module 8030NTS
Compact - space-saving - highly precise - maintenance free!
-
GPS Module 6870
Module 6870 is a GPS clock in a compact aluminium housing for 35mm DIN rail mounting (DIN EN 60715 TH35). The module is easily clipped onto the rail via a clip based on "snap-in" mechanism.