Home / Products /

USB – RS-485 Interface Converter

AN-USB-RS485 interface converter is a cost-effective way to convert RS485 industrial buses to a USB interface.



  • Compatible with USB1.1, highest speed can reach 12 Mbps
  • Compatible with USB2.0 
  • Supports remote wake up and power supply management
  • Supports hot plug and PnP
  • Need no I/O location and IRQ setting, friendly UI
  • Supports RS-232  full handshake protocol, support full duplex data operating mode
  • RS-232 serial port transmission speed maximum 115.2Kbps

Computer interface: USB V1.1 2.0 Plug and Play.
Operational system virtual serial port driver.
Supports Windows 98/ME/XP/2000/CE, MAC & Linux 2.4.20 or superior.
Field Interfaces: RS-485 Half Duplex (dual buses),
Automatic flow control for RS485 Half Duplex.
Transmission rate: from 300 bps to 1Mbps.
MaximumRS-485 cable length : 1200 m
Maximum number of devices in the RS485 network: Half Duplex to 32 devices
Power: from the USB port.
Consumption: RS-485 bus protection: 600W.
USB connection: Mini-B connector. 100cm cable with the module.
RS-485 connector: DB 9Male
ABS enclosure: 60 x 57 x 24 mm(not include cable)
Operating environment: 0 to 70°C, 10 to 90% relative humidity, non-condensing

Product Description

AN-USB-RS485 interface converter is a cost-effective way to convert RS485 industrial buses to a USB interface. When connected to a PC USB port the AN-USB-RS485 module is automatically detected and is installed as a native COM port which is compatible with any existing serial communication application. Muliple modules can be installed when using USB hubs thus allowing a hassle-free configuration of a multi serial system without any IRQ or DMA configuration.They have 600W protect between the USB port and RS485 protects the PC from spykes or possible misconnections in the communication.

Other

Hotline: (+84) 919.900.247