VHF/UHF Wireless Data Transceiver
VHF/UHF Wireless Data Transceiver is high-speed, industry certified data radios designed for telemetry, SCADA, AVL, wireless data, mobile-data and remote control applications.
VHF/UHF Wireless Data Transceiver is high-speed, industry certified data radios designed for telemetry, SCADA, AVL, wireless data, mobile-data and remote control applications. Designed by AD-net for long-range reliable communication using high-performance RF circuitry and filters, it is also feature-rich.
- Programmable transmission power
- Programmable squelch level
- High frequency stability
- No extra software or programming needed to implement communications
- Transparent and direct asynchronous communication interface
- Long range
- Suitable for both master station and remote station
- Half-duplex or simplex
- Flexible configuration as point-to-point or point-to-multipoint
- Rapid and easy installation
- Easy integration into any OEM equipment
- Small size and low weight
Frequency range: VHF/UHF
Channel spacing: 25 KHz
Modulation: GMSK/MSK/FSK
Channel capacity: 16
Channel selection: Program through asynchronous interface Operating mode: Half-duplex or simplex
Data transmission rate: 19200/9600/4800/2400/1200bps
Data interface rate: 19200/9600/4800/2400/1200bps
Data interface bits: 8
Data interface parity: None / Odd / Even programmable
Data interface stop bit: 1
Frequency stability: ±1.5ppm
Power supply voltage: DC 12V (11-14V)
Current drain: 90mA when receiving; 1.7A when transmitting at 10W
Operating temperature: -40’C to +70 cC Dimensions: 125 mm x 76 mm x 34 mm
Weight: 370g
Transmitter
RF power output: 10 W(1-10W programmable)
Spurs/Harmonics rejection: 70dB
Audio distortion: <=2%
Output impedance: 50 Ohm
Receiver
Receiver sensitivity: 0.18 µ v (12 dB SINAD)
AF output power: 0.5W
Audio distortion: -C3%
Spur rejection: -70dB
Image rejection: -80dB
Product Description
VHF/UHF Wireless Data Transceiver is high-speed, industry certified data radios designed for telemetry, SCADA, AVL, wireless data, mobile-data and remote control applications. Designed by AD-net for long-range reliable communication using high-performance RF circuitry and filters, it is also feature-rich.
Other
-
Wi-Fi(802.11 a/b/g) To Serial Port Converter
AN-WF-RS-232/422/485 is WiFi wireless access based serial RS-232/422/485 to IP converter / wifi serial networking device.
-
Serial to Wireless Digital Transmission Module
AN-WF-RS-300M/500M/1000M/2000M wireless digital transmission module offers standard RS-232, RS-485 and UART/TTL level interfaces for direct connection with computers, use's RS-485 equipments, SCM or other UART parts.
-
Zigbee to RS-232/422/485 converter
The AN-ZIGBEE-RS is a cost effective and highly integrated Serial-to-Zigbee wireless Converter.