Telecommunications -IT
Industrial Communication
IP-PBX system
Energy Equipment
Extra Low Voltage
VHF-UHF System
Loop-IP6510 Multiple WAN Router/Bridge
The Loop-IP6763 transports E1/T1 plus STM-1 signals over an IP network.
As the core communications network migrates from legacy TDM to IP/MPLS or Metro Ethernet to leverage CapEx and OpEx efficiently, the Loop-IP6763 TDMoEthernet Aggregator provides a cost-effective solution which allows operators to transport up to 32 E1/T1, 4 STM-1/OC-3 or 1 STM-4/OC-12* along with 4 Giga LAN traffic over existing IP/MPLS* or Metro Ethernet network. The E1/T1 SCSI interface is fixed on main board while there are two hot-swappable tributary slots for STM-1/OC-3 or STM-4/OC-12* plug-in card types.
Loop-IP6763 TDMoEthernet Aggregator converts the TDM data stream and timing information from both PDH and SDH/SONET ports into packets and transmits to the connected IP/MPLS* or Metro Ethernet network via dual combo Gigabit Ethernet WAN ports with 802.3ad Link Aggregation capability. Another Pseudowire device converts the received packet stream back to original PDH and SDH/SONET data stream along with the original timing information.
Loop-IP6763 TDMoEthernet Aggregator employs various Pseudowire Encapsulation protocols such as SAToP, SONET/SDH CEP, CESoPSN, MEF-8*. To compensate the inherent Packet Delay Variation (PDV) of IP/MPLS* or Metro Ethernet network, Loop-IP6763 TDMoEthernet Aggregator utilizes Jitter Buffer Control and can compensate up to 512 ms with G.823/G.824 Traffic Interface conformance (+/- 1ppm).
Other
Loop-IP6700 TDMoEthernet
Loop-IP6700 TDMoEthernet is used to transport TDM traffic over IP network, in addition to Ethernet traffic. As the core communications network migrates from TDM to IP, the
IP6704A TDMoEthernet
The Loop-IP6704A device allows operators to transport E1 ,T1*, E&M, X.21, or RS232 data stream with timing information over PSN (Packet Switched Network) via Pseudowire Protocol – SAToP/CESoPSN/MEF8*.
Modem G.SHDSL Loop-H3300
The Loop-H3300-3S is part of the H3300 family of CPE products based on the G.SHDSL transmission standard.
V4300 Mini DACS E1/T1 Converter
The Loop-V4300 Mini DACS E1/T1 converter provides both DS0 and n x 64 Kbps cross-connect between any T1 and E1 ports and E1 to T1 format conversion functions.