Loop-IP6510 Multiple WAN Router/Bridge
The Loop-IP6763 transports E1/T1 plus STM-1 signals over an IP network.
As the core communications network migrates from legacy TDM to IP/MPLS or Metro Ethernet to leverage CapEx and OpEx efficiently, the Loop-IP6763 TDMoEthernet Aggregator provides a cost-effective solution which allows operators to transport up to 32 E1/T1, 4 STM-1/OC-3 or 1 STM-4/OC-12* along with 4 Giga LAN traffic over existing IP/MPLS* or Metro Ethernet network. The E1/T1 SCSI interface is fixed on main board while there are two hot-swappable tributary slots for STM-1/OC-3 or STM-4/OC-12* plug-in card types.
Loop-IP6763 TDMoEthernet Aggregator converts the TDM data stream and timing information from both PDH and SDH/SONET ports into packets and transmits to the connected IP/MPLS* or Metro Ethernet network via dual combo Gigabit Ethernet WAN ports with 802.3ad Link Aggregation capability. Another Pseudowire device converts the received packet stream back to original PDH and SDH/SONET data stream along with the original timing information.
Loop-IP6763 TDMoEthernet Aggregator employs various Pseudowire Encapsulation protocols such as SAToP, SONET/SDH CEP, CESoPSN, MEF-8*. To compensate the inherent Packet Delay Variation (PDV) of IP/MPLS* or Metro Ethernet network, Loop-IP6763 TDMoEthernet Aggregator utilizes Jitter Buffer Control and can compensate up to 512 ms with G.823/G.824 Traffic Interface conformance (+/- 1ppm).
Other
-
Loop-IP6700 TDMoEthernet
Loop-IP6700 TDMoEthernet is used to transport TDM traffic over IP network, in addition to Ethernet traffic. As the core communications network migrates from TDM to IP, the
-
IP6704A TDMoEthernet
The Loop-IP6704A device allows operators to transport E1 ,T1*, E&M, X.21, or RS232 data stream with timing information over PSN (Packet Switched Network) via Pseudowire Protocol – SAToP/CESoPSN/MEF8*.
-
Modem G.SHDSL Loop-H3300
The Loop-H3300-3S is part of the H3300 family of CPE products based on the G.SHDSL transmission standard.
-
V4300 Mini DACS E1/T1 Converter
The Loop-V4300 Mini DACS E1/T1 converter provides both DS0 and n x 64 Kbps cross-connect between any T1 and E1 ports and E1 to T1 format conversion functions.